I dont know what I did... - Page 2 - G35Driver - Infiniti G35 & G37 Forum Discussion

Feb 20, 2007 | 06:08 PM

#16

Picus

Staff ALUMNI

iTrader: (2)

Joined: Jun 2005

Posts: 3,204

Likes: 7

From: Toronto, ON

Quote:

Originally Posted by CERTAUTOG35

Hey picus that looks real good.... we should write a little detail manual and post it up for everyone if your interested i remeber someone had mentioned it before ( I also do Detailing and have a shop ) but if your interested let me know i would love to share my knoweledge with everyone

You mean something like this?

https://g35driver.com/forums/repairing-detailing-diy/105461-detailing-caring-your-ride.html

Definitely feel free to add any info you want to that post, it is a living entity and the more perspectives the better.

Feb 20, 2007 | 07:34 PM

#17

bizzzrak

Guest

Posts: n/a

The detail got me frustrated so I'm going to start over this weekend haha. But I have XMT Carnuba Finishing Glaze. Will that work?

Feb 20, 2007 | 07:43 PM

#18

Picus

Staff ALUMNI

iTrader: (2)

Joined: Jun 2005

Posts: 3,204

Likes: 7

From: Toronto, ON

Quote:

Originally Posted by bizzzrak

The detail got me frustrated so I'm going to start over this weekend haha. But I have XMT Carnuba Finishing Glaze. Will that work?

No, it's not abrasive so all it'll do is fill.

Feb 20, 2007 | 09:41 PM

#19

harley01

Registered User

Joined: Dec 2004

Posts: 984

Likes: 3

Quote:

Originally Posted by picus112

You mean something like this?

https://g35driver.com/forums/showthread.php?t=105461

Definitely feel free to add any info you want to that post, it is a living entity and the more perspectives the better.

This should be a sticky in the detailing section IMHO. Great info.

Feb 20, 2007 | 10:01 PM

#20

Picus

Staff ALUMNI

iTrader: (2)

Joined: Jun 2005

Posts: 3,204

Likes: 7

From: Toronto, ON

Quote:

Originally Posted by harley01

This should be a sticky in the detailing section IMHO. Great info.

It was for awhile, then got moved to the DIY. I think I might move it back though, it seems to be overlooked there.

Feb 21, 2007 | 12:27 PM

#21

bizzzrak

Guest

Posts: n/a

Now do you think if I used the #1 Fine Swirl Remover with a less abrasive pad. I applied the XMT #3 Intermidete Swirl Remover with a Orange pad, and the XMT #1 Fine Swirl with a white pad. What could be another pad that I could use with the XMT #1 Fine Swirl Remover?

Feb 21, 2007 | 04:12 PM

#22

redlude97

Registered User

iTrader: (25)

Joined: Feb 2006

Posts: 1,911

Likes: 8

From: Seattle, WA

Quote:

Originally Posted by bizzzrak

If you have hazing, and the XMT #1 w/white pad isn't removing it, you want to use the #1 with a more aggressive pad, not a less aggressive pad, not sure of which pads you have, but you can try #1 with an orange pad to see if it removes the hazing, then follow up with #1w/ a white pad again to get the most gloss out of your finish