I am painting my grill right now, I just finished sanding it down with 100 grit sand paper and now I just applied the second coat of " Krylon Fusion Plastic Paint" When I put the 4th coat on I am going to put 3-4 coats of clear coat. I went to Home Depot and got "BEHR Polyurethane Finish B-600 crystal clear satin" I looked on the back and it says that it is for "all interior bare or water base stained wood surfaces" but the guy told me that I could use this clear coat on the plastic grill. Is this gonna make my paint job peel? Please let me know.

 

Since you're using Krylon paint why wouldn't you use Krylon clear, I've never thought mixing company/formulas was a good idea....
Gary

 

They didn't have the Krylon clear coat, what should I do? Should I try this clear coat out? I'm pretty sure it'll be fine I just wanted to make sure.

 

Don't use it.

 

Would it just be better to go without clear coat the to try using this one??

 

go to autozone, pepboys, advanced autoparts. Get some duplicolor clearcoat. (if your doing this job with a spraycan).

 

I spray painted some plastic with the krlyon paint and waited for it to dry and then clear coated it with the behr and it was fine so I don't tihnk I'll have a problem

 

paint it with a realy paint gun they come out much better