4.08 or 3.9 gear for 06 6mt ???
4.08 or 3.9 gear for 06 6mt ???
i was just wondering the advantages and disadvantages of each gear and if anyone has one of these gears installed ? i have a 06 sedan 6mt and im tossing around the idea of getting a gear .. thanks for any input
basically drive around in 1 lower gear than you normally would (ie 5th instead of 6th, 2nd instead or 3rd etc). that will simulate those FD's.
the advantage is you can accelerate faster since you are usually driving higher in the rpm band
the advantage is you can accelerate faster since you are usually driving higher in the rpm band
if I understand the OP correctly the question is regarding 3.9 vs 4.08 (not either vs OEM 3.5)... 4.08 is a Nissan production ring and pinion gear set and costs 1/2 of the aftermarket 3.9 - for that reason alone I would suggest it.
Originally Posted by OCG35
if I understand the OP correctly the question is regarding 3.9 vs 4.08 (not either vs OEM 3.5)... 4.08 is a Nissan production ring and pinion gear set and costs 1/2 of the aftermarket 3.9 - for that reason alone I would suggest it.
yes .. iam asking the differences between the 4.08 vs 3.9 wich would be the most benificial for a n/a motor, would it make the car worse for highway driving .. id just like to hear what people have to say before i think about breaking the piggy bank on this mod .. thanks for any info
Originally Posted by bonkrokz
yes .. iam asking the differences between the 4.08 vs 3.9 wich would be the most benificial for a n/a motor, would it make the car worse for highway driving .. id just like to hear what people have to say before i think about breaking the piggy bank on this mod .. thanks for any info
Read my350Z, fresh alloy, 6mtdotnet, 350ztech... there’s a bunch of info out and about if you look.
4.083 is about $450-500, 3.917 is about $1200-1300. To me there isn’t anything that would make the 3.9 worth $700-800 more than the 4.0... but since you are looking for more opinions than mine I'd suggest you check the sites I mentioned, because you probably won’t find it here.
http://www.g35parts.com/9083/osc/index.php?cPath=58_64
$441- for the 4.08 / $525- for the central 20 3.9
not to bad its the labor im afraid of
thanks for your input
$441- for the 4.08 / $525- for the central 20 3.9
not to bad its the labor im afraid of

thanks for your input
Trending Topics
Originally Posted by bonkrokz
http://www.g35parts.com/9083/osc/index.php?cPath=58_64
$441- for the 4.08 / $525- for the central 20 3.9
not to bad its the labor im afraid of
thanks for your input
$441- for the 4.08 / $525- for the central 20 3.9
not to bad its the labor im afraid of

thanks for your input
Install is about 400-450 (if I remember correctly)... if you are getting LSD this a good time to do it - not much more $
yes, after market... if you're happy with the OEM no reason to switch - but there are much better available... I only mentioned it becasue you wouldnt want to turn around a few month or a year later to pay for LSD install that you could have had done at time of FD... I have a base AT so it was open diff, I was getting LSD ayway and did it at the same time as FD.
i went from 3.35 to 3.53 in my auto and i think it made me slower from a roll, but a bit quicker from a stop. most of my "driving" is from a roll so i think im going back to the 3.35's. anyone else with an auto notice this?
Originally Posted by GrayG35
i went from 3.35 to 3.53 in my auto and i think it made me slower from a roll, but a bit quicker from a stop. most of my "driving" is from a roll so i think im going back to the 3.35's. anyone else with an auto notice this?
What speed are you “rolling” from that you feel you don’t have acceleration?


