Its time for 3.5 or 3.6 rear gearing !!!
^I dunno.
There are potential differences between ones like Mine, Mark's, Chris' (03.0 with the old ecm) and the 03.5-04.0 with the newer ECM but older TCM and 04.5 like yours with the newer ECM and TCM
Mark, do you have a way to check the trouble codes (stored ones too) easily?
There are potential differences between ones like Mine, Mark's, Chris' (03.0 with the old ecm) and the 03.5-04.0 with the newer ECM but older TCM and 04.5 like yours with the newer ECM and TCM
Mark, do you have a way to check the trouble codes (stored ones too) easily?


i've beat a 335i and never raced an E46 M3 but i have a lot more than just gears.
you should look in ENGINE, DRIVETRAIN, and TUNING section
This information has been hashed over MANY MANY TIMES
The reason for the CC not working is related to the Transmission Control Module. It compares values with the FD and thus will not allow CC to engage with values exceeding +/- 7% or so....which is the diff of the gearing
I lose CC function around 84-85 MPH. If I don't exceed that speed I can use the CC fine. Anytime I do exceed I must turn off the car for 10-15 sec and it will reset and I can use it again.
This information has been hashed over MANY MANY TIMES
The reason for the CC not working is related to the Transmission Control Module. It compares values with the FD and thus will not allow CC to engage with values exceeding +/- 7% or so....which is the diff of the gearing
I lose CC function around 84-85 MPH. If I don't exceed that speed I can use the CC fine. Anytime I do exceed I must turn off the car for 10-15 sec and it will reset and I can use it again.
Nice Mods list !!!
Im not to far off Time to race a 335i LOL..
So a 3.7 FD upgrade is a go for me. I dont want to CC above 80 anyway, if that is the only down fall im Sold!!!!!!!!!
Im not to far off Time to race a 335i LOL..
So a 3.7 FD upgrade is a go for me. I dont want to CC above 80 anyway, if that is the only down fall im Sold!!!!!!!!!
Go the tech section of this forum - particularly drivetrain (for FD) - the other "power mods" you are after are in the tech forum as well. Those of us that did this mod years ago researched then asked questions that had not yet been answered (and in some cases just have to take a chance and try things based on logic). That makes the decision process less questionable and more satisfying. Try it.
you really need to spend some time researching... with a question like that it's clear you're not even sure what 3.7FD is.
Go the tech section of this forum - particularly drivetrain (for FD) - the other "power mods" you are after are in the tech forum as well. Those of us that did this mod years ago researched then asked questions that had not yet been answered (and in some cases just have to take a chance and try things based on logic). That makes the decision process less questionable and more satisfying. Try it.
Go the tech section of this forum - particularly drivetrain (for FD) - the other "power mods" you are after are in the tech forum as well. Those of us that did this mod years ago researched then asked questions that had not yet been answered (and in some cases just have to take a chance and try things based on logic). That makes the decision process less questionable and more satisfying. Try it.
Whoever has install questions:
https://g35driver.com/forums/drivetr...tial-swap.html
https://g35driver.com/forums/drivetr...-into-5at.html
https://g35driver.com/forums/drivetr...tial-swap.html
https://g35driver.com/forums/drivetr...-into-5at.html
Last edited by herrschaft; Nov 16, 2010 at 12:43 AM.
So the v36 7a/t has a gear ratio of 3.3? if i understand what your saying
then why do you have this question:




