Before I spend the money I would like to know what I could expect from this mod. Do they compliment each other or can I get the same gains by just going with the ISO spacer, or just the MRev manifold?

Thanks,

 

man, a hole day went by and you didn't get flamed for not searching! This forum is slipping Anyways I won't, i'll help If you have the rev-up motor both are good power adders, particularly if you have other breathing mods like intake and exhaust. If picking just one go for the mrev2 manifold. both these mods are likely the best bang for buck imo. If your looking for hp and tq quotes...well i don't believe in most overstated claims, but you will feel them on butt-dyno. Now get out there and do it and drive like you stole it

 

MR2 made a very noticeable difference in my sedan. I just need to add the spacer now. I have a NISMO CAI and an HKS axle back exhaust.

 

If you have an 05+ then get the MREV and spacer. Do them both at once since you will have the intake manifold off anyway, no sense in doing it twice. I noticed nice gains with my MREV and Spacer.

 

i hear you only really need a mrev if you have an 06-07 6MT

 

The MREV works best on the revup engines (05-07 6MT's) but it has shown gains on non-revups as well.

 

Well I have an '03.5 so I don't believe it is the rev up engine. I also wonder a bit if this mod was done to it already. Is there an easy way to see if it was already done to the car?
To everyone thanks for not blasting me on a search, I typed in Motordyne and that was just too much info to go through in the short time I had. So thanks for all the kindness. (pfffttt)

 

What you need is the MotorDyne 5/16" spacer ISO. They perfected this
mod long before all the copy cats arrived with their junk immitations. If
you have any concerns contact Tony at 661-993-5111. G/L
Gary

 

Mrev2 and 5/16" spacer is a great combo. I still feel like I lost a bit of torque but that all changes at around 4k. The thing pulls much harder. A little boggy before that though, but it's a good trade off.

 

hey what part of tacoma do you live in? i live in federal way but go to school bates tech in tacoma.

 

WTF??? you are reviving a yr old thread for that?

The guy probably moved by now - btw, PM **** like that... bringing back a dead thread for something like that just clutters up the forum.