Detailed UTR Carbon Fiber "Z" Tube Release Info
#31
I've had this for a while and am just getting around to installing it. I thought about drilling the CF G-tube to route the line back into it, rather than running the little filter. Any comments or suggestions? Should I just run it with the little filter and not give it any more thought?
Wouldn't this cause the same sort of issues as routing a blow-off-vavle to atmoshere instead of it going back into the intake tract?
Wouldn't this cause the same sort of issues as routing a blow-off-vavle to atmoshere instead of it going back into the intake tract?
#32
Originally Posted by GT-Ron
I've had this for a while and am just getting around to installing it. I thought about drilling the CF G-tube to route the line back into it, rather than running the little filter. Any comments or suggestions? Should I just run it with the little filter and not give it any more thought?
Wouldn't this cause the same sort of issues as routing a blow-off-vavle to atmoshere instead of it going back into the intake tract?
Wouldn't this cause the same sort of issues as routing a blow-off-vavle to atmoshere instead of it going back into the intake tract?
![](http://www.grubbsperformance.com/Merchant2/graphics/00000001/intake_tube.jpg)
#33
Originally Posted by OC 350GTCoupe
Drill a hole in the Tube? I thought it came with the nipple? Or is it the nipple that has to be drilled in order to route the line to it?
![](http://www.grubbsperformance.com/Merchant2/graphics/00000001/intake_tube.jpg)
![](http://www.grubbsperformance.com/Merchant2/graphics/00000001/intake_tube.jpg)
The new (current) version is as pictured above
#36
Registered User
iTrader: (4)
Join Date: Aug 2005
Location: New York
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
GT Ron, you got yourself a first generation CF tube. You can send it back to us and we can drill the hole for you or if you prefer to do it yourself, we can send you the PCV nipple.
PM us.
PM us.
#37
Originally Posted by OC 350GTCoupe
Drill a hole in the Tube? I thought it came with the nipple? Or is it the nipple that has to be drilled in order to route the line to it?
![](http://www.grubbsperformance.com/Merchant2/graphics/00000001/intake_tube.jpg)
![](http://www.grubbsperformance.com/Merchant2/graphics/00000001/intake_tube.jpg)
I thought maybe i would get everything in this bottom picture (minus the filter breather).
![](http://www.unlimitedtuning.com/picts/products/FgalleryPUT-2.jpg)
#38
Registered User
iTrader: (1)
Join Date: Feb 2005
Location: Houston, TX
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OC 350GTCoupe
All i got in the mail was the tube pictured above? Is that all im supposed to get?
I thought maybe i would get everything in this bottom picture (minus the filter breather).
![](http://www.unlimitedtuning.com/picts/products/FgalleryPUT-2.jpg)
I thought maybe i would get everything in this bottom picture (minus the filter breather).
![](http://www.unlimitedtuning.com/picts/products/FgalleryPUT-2.jpg)
#39
Originally Posted by badtziscool
Yeah. The pics are misleading, but nothing to worry about. You're supposed to use the stock rubber couplings. All you need is the tube.
#40
i got 05 g coupe and currenty i have the nismo cold air intake, will this CF tube help me any. the nismo z tube is placed really weird and i am having to put a kink in the breather tube
Pardeep
Pardeep
#43
lol
And I never did do anything with my 1st. gen CF-wrapped Z-tube. The fiberglass just looked too rough on the inside for me to feel comfortable with. I ended up installing an OEM Z-tube since everything else underhood looks stock.
And I never did do anything with my 1st. gen CF-wrapped Z-tube. The fiberglass just looked too rough on the inside for me to feel comfortable with. I ended up installing an OEM Z-tube since everything else underhood looks stock.
Thread
Thread Starter
Forum
Replies
Last Post
Tolboothwilley™
Exterior-Vendor
6
07-28-2016 12:42 AM