Replacing the spark plug well seals in the valve covers - Page 13 - G35Driver

May 6, 2020 | 01:52 PM

#181

JoshD4PREZ

Registered User

Joined: Jun 2019

Posts: 16

Likes: 1

Custom full exhaust, Ztube, fresh clutch & dmflywheel, staggered niche 18's

That seems very possible, well thank you I’ll check it out when I get it opened up then.

Jul 14, 2020 | 04:56 PM

#182

MikeG35Coupe

Registered User

iTrader: (2)

Joined: Dec 2003

Posts: 677

Likes: 89

From: Rhode Island

One owner 2004 G35 Coupe 6MT

Quote:

Originally Posted by FreshLikeAG

I saved my oem valve covers when I switched them with some cheapo brand. Passenger VC gasket is leaking again so I'm going to put the oem ones back in. Seems people have had success with rtv on the seals

I'm about to attempt this as I found oil in the #5 and #6 tubes when I went to change plugs. Are you waiting a certain amount of time, or even letting the Ultra Grey fully cure, before putting the valve covers back on? Any reason why you didn't put any on the inside of the seals where they meet the spark plug tubes? I guess I don't fully understand where the seals are failing and oil is getting by. Judging from this picture I guess they fail where they seat inside of the VC?

UPDATE: Nevermind. I ran across a post from last year by scumbagsleeper that detailed what he did that answers my questions.

Last edited by MikeG35Coupe; Jul 27, 2020 at 04:03 PM. Reason: Updated

Nov 7, 2021 | 01:17 AM

#183

Scorpi0

Registered User

Joined: Feb 2018

Posts: 3,087

Likes: 445

From: LA, Cali

Found a video with someone who came up with a faster fix. He basically uses RTV to seal the tubes from the outside instead of the inside. This will probably be a lot easier for most people. The seal probably wont be as strong vs doing it from the inside, but RTV black is a damn good sealer and I think it will still work well and save a lot of time. Plus with this method you wont have to mess with any other gaskets.