Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)

Motor Oil Viscosity/Weight Recommendation...

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 11-06-2011, 08:16 AM
Jiggyfingers's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Dirty Jerzey
Posts: 126
Likes: 0
Received 21 Likes on 12 Posts
Motor Oil Viscosity/Weight Recommendation...

I have seen several posts stating that the preferred viscosity for oil is 5w30 and others say 10w30. Since ownership I have only used synthetic but wondered whether to stick to 5 or use 10?

What is the difference?

What is the preference for daily driving?

What brand is best? ( I used Mobil1 on my last change but I can tell it will be quite expensive over time. This stuff isn't cheap!)

It's an 07 Revup motor with 71,000 grand on the odometer. I live in NJ and deal with seasonal weather. When summer its pretty hot and when its winter its pretty darn cold. So the car will deal with all types of temperatures from one extreme to the next.

Thanks...
 
  #2  
Old 11-06-2011, 09:50 AM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
5W30 will save you a wee bit of gas. 10W30 offers a wee bit more protection in warmer climates. Really, either will be fine.
 
The following users liked this post:
Infiniti Chica (11-07-2011)
  #3  
Old 11-06-2011, 07:44 PM
Infiniti Chica's Avatar
Registered User
iTrader: (2)
Join Date: Feb 2009
Location: Rio de Jeneiro or East Coast
Posts: 1,083
Received 96 Likes on 70 Posts
TXScout is right... no surprise there.

There have been loooooooooooooooooooong threads on this topic here and on almost every car forum on the net. For the VQ engine, the wear numbers suggest that Mobil 1 is not the best. Look at Castrol Edge or Pennziol Platinum... and hit the search button for finding one of those loooooooooooong threads. While you're at it, invest in good filters such as K&N, Pure 1, Mobil 1, Bosch, Wix or some other good ones. Avoid Fram!

You can go 5/30 in winter and 10/30 in the summer, and change your oil every 7-8K miles as opposed to every 3-4K.

Good luck,
Isa
 

Last edited by Infiniti Chica; 11-06-2011 at 07:48 PM.
  #4  
Old 11-06-2011, 07:47 PM
Jairen's Avatar
Registered User
iTrader: (18)
Join Date: Mar 2009
Location: Bremerton, Wa
Posts: 3,544
Received 149 Likes on 113 Posts
German Castrol 0W-30 or Penzoil Ultra 5W-30 for me.
 
  #5  
Old 11-07-2011, 08:12 AM
Jiggyfingers's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Dirty Jerzey
Posts: 126
Likes: 0
Received 21 Likes on 12 Posts
Thanks. Last thing I want to do is start a long thread that already has been discussed before. Just wanted some quick direction and the best recommendation for my G35....
 
  #6  
Old 11-07-2011, 01:37 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
Some here will whine about Mobil 1 wearing harder on the VQ. But I find it funny that most high end European, German, and Japanese car manufacturers use it, my Nissan Dealership uses it in the Quick change area. Seems to me that it would not be in Nissans interest to use an oil that would give you trouble down the road.
 
  #7  
Old 11-07-2011, 02:09 PM
B T's Avatar
B T
B T is offline
Registered User
iTrader: (1)
Join Date: Apr 2009
Location: Mobile, AL
Posts: 358
Received 7 Likes on 7 Posts
I haven't used Royal Purple myself in a while because I couldn't tell any difference, BUT I was at a major petrochemical refinery for a while lately, and I saw pallets of barrels of Royal Purple lying around for their use. Being the Royal Purple is not owned by said oil company who shall remain nameless (starts with a "C"), I'd assume there's something to it since they didn't even use their own oil.
 
  #8  
Old 11-07-2011, 02:53 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
It's used widely in reciprocating machinery (gas compressors, pumps, gear reduction systems etc), search the web a bit. It has been shown to reduce the amount of horsepower needed and lengthens time between rebuilds. It's good stuff.

Remember, it's being used in engines the size of a bus, running at less than 600rpm (yes, 600, not 6000rpm)
 

Last edited by Texasscout; 11-07-2011 at 04:23 PM.
  #9  
Old 11-07-2011, 04:34 PM
B T's Avatar
B T
B T is offline
Registered User
iTrader: (1)
Join Date: Apr 2009
Location: Mobile, AL
Posts: 358
Received 7 Likes on 7 Posts
was not aware of that, good info.
 
  #10  
Old 11-03-2013, 02:36 PM
yosip1115's Avatar
Registered User
iTrader: (2)
Join Date: Jun 2011
Location: CT
Posts: 1,089
Received 75 Likes on 74 Posts
There is so much false info here, to start, what big tex stated was completely wrong... Everyone who reads this forum just leave it and forget it all. Go to motor oil college. let me know when you pass the motor oil final exam.

bobistheoilguy.com
 
  #11  
Old 11-03-2013, 03:04 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
Originally Posted by yosip1115
There is so much false info here, to start, what big tex stated was completely wrong... Everyone who reads this forum just leave it and forget it all. Go to motor oil college. let me know when you pass the motor oil final exam.

bobistheoilguy.com
I know what I see. You will find RP on MOST compressors off/onshore. It has PROVEN to make engines last longer and reduce internal friction so less horsepower is required for a given compression level.

The stuff goes out there by the 55 gallon drum.

http://www.machinerylubrication.com/...icant-upgrades

http://www.wennigercompressor.com/Synerlec.htm

http://www.mt-online.com/marchapril2...vironments/pdf
 

Last edited by Texasscout; 11-03-2013 at 03:19 PM.
  #12  
Old 11-03-2013, 04:00 PM
yosip1115's Avatar
Registered User
iTrader: (2)
Join Date: Jun 2011
Location: CT
Posts: 1,089
Received 75 Likes on 74 Posts
Originally Posted by Texasscout
I know what I see. You will find RP on MOST compressors off/onshore. It has PROVEN to make engines last longer and reduce internal friction so less horsepower is required for a given compression level.

The stuff goes out there by the 55 gallon drum.

http://www.machinerylubrication.com/...icant-upgrades

http://www.wennigercompressor.com/Synerlec.htm

http://www.mt-online.com/marchapril2...vironments/pdf
I am referring to this:
"5W30 will save you a wee bit of gas. 10W30 offers a wee bit more protection in warmer climates. Really, either will be fine."

please, explain why this is true^...because it's a completely idiotic statement.

Talking about royal purple being used in a different machine is completely irrelevant to our engine longevity and performance. If you want to go buy a 55 gallon drum of oil and use it for life you are an idiot. It will break down over time and become useless. So read that link I put up Tex. Come back to admit you were wrong, if you can make it through the ten chapters.

OP... M1 is cheap. If you drive fast, you have to change your oil every 4k minimal.
If you never use the gas, 5k tops. With the newest most advanced oil out there today you will still need to change it at 5k.

Best oils for our car in my opinion (influenced by bob)

Spirited daily driving: AMS oil 5w-20 or Redline (Yes, OEM is 5w-30)

Daily driving: Mobile1 0w20 Change at LEAST every 5k. It will burn off most likely so check the stick periodically after the engine has been sitting all night.
 
  #13  
Old 11-03-2013, 05:51 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
If you don't understand why, I'm not wasting time explaining it to you.
 
  #14  
Old 11-03-2013, 06:02 PM
yosip1115's Avatar
Registered User
iTrader: (2)
Join Date: Jun 2011
Location: CT
Posts: 1,089
Received 75 Likes on 74 Posts
Originally Posted by Texasscout
If you don't understand why, I'm not wasting time explaining it to you.
I like to learn, teach me something.
 
  #15  
Old 11-04-2013, 08:49 AM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
You are convinced that viscosity has nothing to do with engine drag or protection so what's the point.
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Motor Oil Viscosity/Weight Recommendation...



All times are GMT -4. The time now is 09:03 AM.