Valve Cover Gaskets
#32
Join Date: Feb 2012
Location: 29 Palms, CA / East Bay 925
Posts: 16
Received 0 Likes
on
0 Posts
#33
They're in the FSM. I can't remember what they are exactly off-hand, but the torque specs are very low (like 6 ft. pounds I believe). In other words, if you don't have a torque wrench that goes that low, you'll want to be careful. I used a screwdriver-type ratchet so it limited the amount of torque I could get on the bolts.
The following users liked this post:
Pooks14 (02-16-2012)
#34
Hey guys ..
whene i changed my plugs i noticed oil on the old plug on the passenger side nearest the firewall . Also . Ive recently been getting this chattering that sounds like two spoons banging into each other . Would the oil on the plug .cause this and how do i fix the oil on the plug issue ?
whene i changed my plugs i noticed oil on the old plug on the passenger side nearest the firewall . Also . Ive recently been getting this chattering that sounds like two spoons banging into each other . Would the oil on the plug .cause this and how do i fix the oil on the plug issue ?
#39
Hey guys ..
whene i changed my plugs i noticed oil on the old plug on the passenger side nearest the firewall . Also . Ive recently been getting this chattering that sounds like two spoons banging into each other . Would the oil on the plug .cause this and how do i fix the oil on the plug issue ?
whene i changed my plugs i noticed oil on the old plug on the passenger side nearest the firewall . Also . Ive recently been getting this chattering that sounds like two spoons banging into each other . Would the oil on the plug .cause this and how do i fix the oil on the plug issue ?
u cought me being lazy on my cell phone ..
But i went back a page or two and got my answer .to what to do about oil in one of my plug wells . (valve covers) seals etc ..
But does anyone have any idea what could be making the chattering spoons clanking sound . Whene i give it gas . It doesnt happen all the time just some times . It hasnt been happening very often .but its starting to concern me .
Thnx for any help or ideas .
And i apologize for not searching . Im just being lazy
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM