Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

Crank no start 04 G35

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Feb 21, 2024 | 08:35 PM
  #1  
Woben's Avatar
Thread Starter
|
Registered User
Joined: Feb 2024
Posts: 2
Likes: 0
G35 coupe 6 speed
Crank no start 04 G35

Hello all, first time poster here. Not sure where to post, figured I start here.

So I'm currently working on a 04 G35 coupe, 6 speed. Long story short this g has sat for bout 8 years. Was my dad’s car, which then turned into my mom’s daily. She got a new car one day and parked this one. After about a year my brothers go to start the car and nothing. It sat since 2016. From then on my brother and his friend have changed the following:

• both camshaft position sensors
• starter
• fuse box replacement (with some new fuses)
• clutch sensor switch
• and currently just did the fuel pump solenoid.

First thing I noticed was the fuel pump not priming and all the rubber tabs for the pedals are nonexistent. So I used my toe to press on the switch and she cranks. She is getting fuel from the pump to the damper after replacing the solenoid. I’ve been reading forums on here for a couple weeks on what it could be and it is overwhelming, basically process of elimination at this point. I’ve also been told to check the spark plugs and see if it’s getting any spark. Haven’t done so yet.

another thing to add I plug the obd sensor in and the these 2 codes popped up for the tps - P2122 & P2127. I’ve read you can bypass and still start the car with it unplugged. Didn’t work there obviously.

I don’t see a red solid light either when cranking as I’m using the original key.

any suggestions would be greatly appreciated. If I’m missing anything or something doesn’t add up / make sense, lmk. I’ll try to answer it best I can.
 
Reply
Old Oct 8, 2025 | 12:54 AM
  #2  
rmvq25's Avatar
Registered User
Joined: Oct 2025
Posts: 4
Likes: 0
Originally Posted by Woben
Hello all, first time poster here. Not sure where to post, figured I start here.

So I'm currently working on a 04 G35 coupe, 6 speed. Long story short this g has sat for bout 8 years. Was my dad’s car, which then turned into my mom’s daily. She got a new car one day and parked this one. After about a year my brothers go to start the car and nothing. It sat since 2016. From then on my brother and his friend have changed the following:

• both camshaft position sensors
• starter
• fuse box replacement (with some new fuses)
• clutch sensor switch
• and currently just did the fuel pump solenoid.

First thing I noticed was the fuel pump not priming and all the rubber tabs for the pedals are nonexistent. So I used my toe to press on the switch and she cranks. She is getting fuel from the pump to the damper after replacing the solenoid. I’ve been reading forums on here for a couple weeks on what it could be and it is overwhelming, basically process of elimination at this point. I’ve also been told to check the spark plugs and see if it’s getting any spark. Haven’t done so yet.

another thing to add I plug the obd sensor in and the these 2 codes popped up for the tps - P2122 & P2127. I’ve read you can bypass and still start the car with it unplugged. Didn’t work there obviously.

I don’t see a red solid light either when cranking as I’m using the original key.

any suggestions would be greatly appreciated. If I’m missing anything or something doesn’t add up / make sense, lmk. I’ll try to answer it best I can.
Hi I’m currently experiencing the same issue did you come upon a fix?
 
Reply
Old Oct 10, 2025 | 11:06 AM
  #3  
MaLPoPieS's Avatar
Registered User
Joined: Jan 2024
Posts: 381
Likes: 128
From: Princeton, FL
Jaguar XFR-S
Watch this video:
 
Reply
Old Oct 13, 2025 | 05:49 PM
  #4  
rmvq25's Avatar
Registered User
Joined: Oct 2025
Posts: 4
Likes: 0
Originally Posted by MaLPoPieS
Watch this video: P2122/P2127
you shared this video to me too unfortunately still the same issue I’m going to get the wiring looked into soon by someone who knows more than me lol or just have it looked at properly I’m not afraid to put like 200$ away to do so
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
atentaten
G35 Sedan V35 2003-06
1
Sep 4, 2023 10:39 PM
Vq_Ghost
G35 Coupe V35 2003 - 07
15
Jul 28, 2023 12:12 PM
ecvsti
G35 Sedan V35 2003-06
3
Jul 22, 2022 03:26 PM
b_dupy
Engine, Drivetrain & Forced-Induction
6
Oct 12, 2016 09:04 AM
deathdoakill
G35 Coupe V35 2003 - 07
4
Nov 29, 2015 03:20 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:25 AM.