WTB: Vortech 1 piece MAF/charge pipe
Joined: Sep 2011
Posts: 424
Likes: 43
From: Oklahoma
G35
Vortech 1 piece MAF/charge pipe
Looking to purchase a new or used Vortech one piece charge pipe like the one in the picture. I believe these sold for around $160 new last year. Willing to pay $200. Let me know... Thanks guys!
(Sorry if this may be in the wrong place. It was either intake/fuel or forced induction and seeing how it's for a Vortech I chose power adders)
(Sorry if this may be in the wrong place. It was either intake/fuel or forced induction and seeing how it's for a Vortech I chose power adders)
Last edited by joeb1983; Feb 11, 2013 at 12:15 PM.
Joined: Sep 2011
Posts: 424
Likes: 43
From: Oklahoma
G35
Sent out PM's and emails to various venders across the board to see if we can't get these in production again, or at worst a batch. Still needing one so if you have one, hit me up.
Trending Topics
Registered User
Joined: Feb 2012
Posts: 7
Likes: 1
From: Birmingham UK
I'm actually looking at producing these in the UK, in fact I've dropped off the necessary parts this afternoon for design and fabrication.
I'm hoping to have these up and running sometime in March I hope. I'll probably have to setup trader status on either G35 or my350, but the plan is in motion.
I'm also looking at anodised versions as well.
I'm hoping to have these up and running sometime in March I hope. I'll probably have to setup trader status on either G35 or my350, but the plan is in motion.
I'm also looking at anodised versions as well.
Joined: Sep 2011
Posts: 424
Likes: 43
From: Oklahoma
G35
^ That would be fantastic! Keep me posted. I plan on powder coating mine if I ever get one, so raw aluminum is fine for me.
Here is a MAF plate I found for $40 from UpRev.
Here is a MAF plate I found for $40 from UpRev.
Last edited by joeb1983; Feb 15, 2013 at 01:32 PM.
Registered User
Joined: Feb 2012
Posts: 7
Likes: 1
From: Birmingham UK
No worries when the time comes I'll post once completed, and I'll subscribe to the necessary status.
I also have and produced anodised plenum spacers, which come in a range of colours dependent on anodising.
I've already sold in the UK, and I'm currently producing the next batch.
I'll post me threads once everything is up and running.
I also have and produced anodised plenum spacers, which come in a range of colours dependent on anodising.
I've already sold in the UK, and I'm currently producing the next batch.
I'll post me threads once everything is up and running.
I have a one piece been trying to get rid of however doesnt have the MAF cut out or I would be using this one came with my kit and was used with a haltech which doesnt need the maf. Sucks.