Aluminum Under Tray (Splash Shield) for G35/350Z/G35X/G37/G37X
Ok so my stock undertray was hanging and I resecured it for now but I want to replace it. Here are some photos.
The KZ bumper hangs significantly lower thats why the tray has to be pulled down at an angle towards the bumper so the holes on the tray didn't quite reach the bumper. I had to cut new holes in the tray to mount it to the bumper. At the same time, the tray pulls on the bumper causing it to look a bit wavy.
I am assuming I am going to need the extended tray. But will your tray account for the amount of drop? If it doesn't angle downwards towards the bumper, since its just aluminum, is it pliable enough that I can bend it to where I need it?
I have an authentic Kuruma Z front bumper 06 coupe. However, with all the reviews as of late, I did order it from Strafe so I don't know how "authentic" it is. I'm pretty anxious to replace this tray so thanks for answering all my questions.
The KZ bumper hangs significantly lower thats why the tray has to be pulled down at an angle towards the bumper so the holes on the tray didn't quite reach the bumper. I had to cut new holes in the tray to mount it to the bumper. At the same time, the tray pulls on the bumper causing it to look a bit wavy.
I am assuming I am going to need the extended tray. But will your tray account for the amount of drop? If it doesn't angle downwards towards the bumper, since its just aluminum, is it pliable enough that I can bend it to where I need it?
I have an authentic Kuruma Z front bumper 06 coupe. However, with all the reviews as of late, I did order it from Strafe so I don't know how "authentic" it is. I'm pretty anxious to replace this tray so thanks for answering all my questions.
I have a Kuruma Z from ConceptZ (it is an authentic polyurethane version). My bumper also sits lower than the stock bumper. I want to say 2", but maybe it's just 1". (Car is at Dynosty so can't just go measure). To accomodate for this I put my shield above the bumper and the bumper sits below it. I am also interested in how the wheel well plastic shielding bolts up if the undertray is modified significantly to accomodate a lower bumper.
Hey dude. I was recently in an accident, and the under-tray I had from you ended up getting damaged, but it was just the front section. Any chance I can get that part alone? PM me. Thanks 
Registered User
Joined: Feb 2012
Posts: 308
Likes: 22
From: Portland, OR
I didn't read through the previous 25 pages because I currently don't have much free time, but this keeps water out right? At least enough for the belts to not squeal? I just had my belts replaced, it's raining nowadays, and I tossed my OEM plastic cover away during the summer, and my belts squeal a little. I'm mainly concerned about rusting on the parts down there. Anyway I'm interested in one if it will keep things dry-ish. Price of the brushed version shipped to 97030 for an '06 coupe. Thanks.
The OEM piece is called a "splash shield" according to NISSAN
It helps keep engine clean, keep water out, aerodynamic, and metal protects while also reinforcing the bumper.
I don't know if there is much to rust down there besides bolts and maybe a few brackets and stuff. Aluminum engine is good for that reason and light weight
Will send you a PM
It helps keep engine clean, keep water out, aerodynamic, and metal protects while also reinforcing the bumper.
I don't know if there is much to rust down there besides bolts and maybe a few brackets and stuff. Aluminum engine is good for that reason and light weight
Will send you a PM
TBW! sup man.. just got back in town and got kinda settled back in... ill tried shipping out that bell housing before i left but i was pressed on time so i didnt get to... ill do it as soon as i get my business situated.. prolly by thursday.... worry that i couldn't get it out sooner..
TBW! sup man.. just got back in town and got kinda settled back in... ill tried shipping out that bell housing before i left but i was pressed on time so i didnt get to... ill do it as soon as i get my business situated.. prolly by thursday.... worry that i couldn't get it out sooner..