And so the APS install begins
#1
And so the APS install begins
Actually its almost finished, I wish I could have taken some pictures with the engine out but the guy doing the install has it down so well that he is knocking this out quick. Every time I've gone by the shop he's either installing an APS kit or Greddy on a 350Z.
Because I'm getting water injection and sways everything might take an extra day, otherwise the car would probably be ready monday or tuesday. I'm expecting it to be done later next week just in time for Hot Import Nights here in Atlanta. The kit is a clean fit, the shop hasn't addressed the custom piping yet but I'll post pics as soon as they do.
Coating the intercooler black was a no go as well, the company that does it didn't know that APS powdercoats their intercooler, so they would have to strip that off then coat the intercooler black, I just decided to skip it completely.
Because I'm getting water injection and sways everything might take an extra day, otherwise the car would probably be ready monday or tuesday. I'm expecting it to be done later next week just in time for Hot Import Nights here in Atlanta. The kit is a clean fit, the shop hasn't addressed the custom piping yet but I'll post pics as soon as they do.
Coating the intercooler black was a no go as well, the company that does it didn't know that APS powdercoats their intercooler, so they would have to strip that off then coat the intercooler black, I just decided to skip it completely.
#4
with everything being in now its so hard to get worthwhile pictures, wednesday would have been perfect. But now the turbos are so tucked away the only decent pictures I'll have will be the intercooler and custom piping. I will take some video of the dyno and my first night out with the car though.
#5
Tony,
You mentioned something about having a new engine. Is that a built-up engine with forged internals, or just a brand new VQ engine? What other mods to you have ( exhaust, plenum, testpipes )? Any gauges installed yet? ...... Good luck on you project, cant wait to see #'s from another G, besides APS's tested G.
You mentioned something about having a new engine. Is that a built-up engine with forged internals, or just a brand new VQ engine? What other mods to you have ( exhaust, plenum, testpipes )? Any gauges installed yet? ...... Good luck on you project, cant wait to see #'s from another G, besides APS's tested G.
#6
Originally Posted by GXCLUSIV
Tony,
cant wait to see #'s from another G, besides APS's tested G.
cant wait to see #'s from another G, besides APS's tested G.
http://www.my350z.com/forum/showthre...8&page=1&pp=20
#7
Originally Posted by SUD
There are other numbers out there. Here is a link to a recently completed 350Z APS TT install. Approx 367 WHP on a completely stock car, including completely stock exhaust. Not sure if it is in that thread (there are two on the subject), but I believe a better exhaust was estimated at approx 30 WHP, meaning this Z should push 400 WHP plus or minus a few ponies.
http://www.my350z.com/forum/showthre...8&page=1&pp=20
http://www.my350z.com/forum/showthre...8&page=1&pp=20
Last edited by GXCLUSIV; 05-20-2005 at 05:05 PM.
Trending Topics
#8
#10
Originally Posted by narkotic
Mine should be done next week too, w/ test pipes any my HKS single exhaust it should get some decent numbers i'm hoping.
#13
#15