If anyone can help me, I'm looking for links to purchase gauge pods for the A-pillar.

I'm looking for something that will match (or closely match) the willow interior so any help is appreciated.

Also, another club member is looking for the same A-pillar that would match the stone interior (light gray).

TIA

 

And I am just looking for anything that's cheap that I can wrap in suede

 

Assuming I cannot find a grey pod to match the Stone...are there any other options besides an A-piller pod? I have Nav so that front cubby is a no-go. TIA

 

I picked up this one. The tan matches the willow ok. I haven't actually installed it yet, but based on a test fitting it does need a bit of trimming, it seems just a hair too tall. Otherwise It seems like a decent piece for the money.

 

Doesn't help you with the color you are looking for, but this is where I bought mine from. The Tan matches pretty close with my interior.

http://www.intensepower.com/infuatrpodg3.html

 

Have you thought of getting the Zeitronix? It has A/F, EGT, and a boost gauge. It fits in your sunglass holder.

https://g35driver.com/forums/showthr...ight=zeitronix

 

Thanks Gman. Very interesting and advances the stealth look which I prefer. Looking into it now. (I guess I do not get fuel / oil / tranny temp options)

 

for the vortech you don't really need the fuel or oil pressure gauge. I have a 6mt and don't know much about autos so I don't know if you need a tranny temp gauge. From what I have read from on the board I don't recall any vortech guys getting tranny temp gauges.

 

Here;s the link to the Zeitronix. You will need to buy a boost and egt sensor. The whole package comes out to like $479.

http://www.zeitronix.com/Products/zt2/zt2.htm

http://www.zeitronix.com/order/order.htm

 

Thanks for the replies Gman

Yeah...and i am installing a tranny cooler anyways...so..I don't think I'll need it.

Any other gauges you would recommend on a Vortech other than A/F and Boost?

 

I only had boost and wideband o2 sensor when I had my vortech. Most s/c guys go the same route. The wideband is a must just so you know that the a/f is not to too lean or rich. The boost gauge will let you know if the belt is slipping. If you are going to get the Zeitronix you might as well get the EGT sensor. It is only $65.

 

The only one I would want extra is the Fuel Temp. I wish they would take out Lambda and put in that. Then it would be perfect. But I think i'll go with this anyway. Better than those piller gauge pods in my opinion

 

It does say it has a "user input" with a 0 to 5V range. You might be able to add a temp sensor...

 

what if you don't have a sunglasses holder anymore? eh?

 

well, then you could get a DW screen, hook it up to a carPC, use the datalogger that comes free with the base kit to send info directly to the PC and save yourself $200 and skip the LCD display...