The G-Spot General discussion about the G Series;
G35 & G37, Coupes & Sedans

engine light, vdc, and slip light is on. Plz help if you can

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old May 7, 2015 | 02:57 AM
  #1  
Mrs.Valdez23's Avatar
Thread Starter
|
Registered User
Joined: May 2015
Posts: 7
Likes: 0
From: Houston
engine light, vdc, and slip light is on. Plz help if you can

Plz give me good info if you can, ill appreciate it. My g35 is acting up takes a few seconds to start up, once I hit 60mph it does like a lil light jump and then the vdc off light aswell with the slip light turns on. Once I stop , turn off try turning back on it'll take a few seconds to turn on. I'll turn it off let it sit , then turn it back on and it turns on regular. Vdc , and slip light is off but engine light is on. But once u hit 60mph it'll do it again . Some times it'll just stall out of no where. It says camshaft sensor on the diagnostic, but I read and say it doesn't work. I see last post was awhile back so it might be fixed already? I need as much as info I am pregnant and wanna be safe while I'm driving.
 
Reply
Old May 7, 2015 | 08:43 AM
  #2  
Urbanengineer's Avatar
Super Moderator
10 Year Member
Liked
Community Favorite
iTrader: (3)
Joined: Jun 2013
Posts: 11,174
Likes: 1,045
From: OH-IO
Premier Member

Interesting. Can sensors should put up a check engine light on the dash. Try getting it diagnosed for sure at a parts store with a car scanner. Auto zone sells Duralast sensors that work fine as OEM replacements.
 
Reply
Old May 7, 2015 | 09:30 AM
  #3  
Mrs.Valdez23's Avatar
Thread Starter
|
Registered User
Joined: May 2015
Posts: 7
Likes: 0
From: Houston
G35

I have, camshaft sensor pops up. I let it sit for a bit and reset and take off the lights and it's good but there's times where it just happens out of no where, I really don't feel safe driving it. I seen the code but that's the code every body goes thru and it ends up not working. 2 weeks ago I got kar washed and right when I left it wouldn't started like it didn't have no gas it'll have to sit a bit for it to start. Then this pops up.
 
Reply
Old May 7, 2015 | 09:40 AM
  #4  
Mrs.Valdez23's Avatar
Thread Starter
|
Registered User
Joined: May 2015
Posts: 7
Likes: 0
From: Houston
infiniti35

Originally Posted by Urbanengineer
Interesting. Can sensors should put up a check engine light on the dash. Try getting it diagnosed for sure at a parts store with a car scanner. Auto zone sells Duralast sensors that work fine as OEM replacements.
I have, camshaft sensor pops up. I let it sit for a bit and reset and take off the lights and it's good but there's times where it just happens out of no where, I really don't feel safe driving it. I seen the code but that's the code every body goes thru and it ends up not working. 2 weeks ago I got kar washed and right when I left it wouldn't started like it didn't have no gas it'll have to sit a bit for it to start. Then this pops up.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mry
General Tech Questions
20
Mar 3, 2023 01:03 AM
SiMpLyMoDiFiEd
The FX-Spot
2
Dec 2, 2021 04:35 PM
Wayne9011
G35 Coupe V35 2003 - 07
6
Aug 17, 2015 01:24 AM
Wayne9011
Engine, Drivetrain & Forced-Induction
2
Jul 27, 2015 11:25 AM
newg37
G35 Coupe V35 2003 - 07
1
Jul 26, 2015 09:32 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:05 AM.