Really Cool Unknown Features
okay this might be a noob question but I've searched and have not found anything.
I have an 06 coupe, can the shoulder belt be adjusted up or down?? The manuel shows that it can but my car does not have the same strap with the button that the book shows. Might there be a different way that I'm not seeing? Can anyone please advise?
I have an 06 coupe, can the shoulder belt be adjusted up or down?? The manuel shows that it can but my car does not have the same strap with the button that the book shows. Might there be a different way that I'm not seeing? Can anyone please advise?
yeah everytime i ask manuel a question he always give me bull**** answers!
So, last night after reading through this loooooong drawn-out thread I thought I'd try out the window thing.... so I peaked out my front room window.. pushed the button.. and watched the windows go down.. yippy!
... until I realized that I now have to get dressed and go outside to the car to roll them back up. doh!!!
go ahead, laugh at me.. I'm an engineer.. it's nothing new.
... until I realized that I now have to get dressed and go outside to the car to roll them back up. doh!!!

go ahead, laugh at me.. I'm an engineer.. it's nothing new.
LMAO, anyone ever notice the "M3" sticker under the sideview mirrors? wtf
and that cool card holder in the console
and that cool card holder in the console
Help me
Contribution to the thread:
Inserting and Removing the Key from the Ignition 6 times in 10 seconds immobilizes the vehicle and renders all KEY FOBS useless. Want to really mess with someone's G or Nissan for that matter...insert your key in his/her car's ignition 6 times in 10 seconds.
After he starts crying perform the following procedure. It can also be used to add up to 5 Key FOBs to 1 Vehicle. This is useful when you want an aditional key or can be used to erase old FOB programming from vehicle in case you lose a key FOB.
KEY FOB ID CODE ENTRY PROCEDURE
Step 1) Sit in drivers seat, close and lock all doors.
Step 2) Insert key into and remove it from ignition key cylinder more than six times within 10 seconds. (Hazard warning lamps will then flash twice).
NOTE: Withdraw key completely from ignition key cylinder each time. If procedure is performed too fast, system will not enter registration mode.
Step 3) Insert key into ignition key cylinder and turn to ACC position.
Step 4) Push any button on remote controller once. (Hazard warning lamps will then flash twice). At this time, the oldest ID code is erased and the new ID code is entered.
Step 5) Do you want to enter any additional remote controller ID codes?
A maximum of five ID codes may be entered. If more then five ID codes are entered, the oldest ID code will be erased. If you do not want to enter any additional remote controller ID codes, go to Step 9).
Step 6) ADDITIONAL ID CODE ENTRY
Lock all doors with LH (driver side) lock/unlock switch (in main power window and door lock/unlock switch).
Step 7) Push any button twice on remote controller once, (Hazard warning lamps will then flash twice). At this time, the oldest ID code is erased and the new ID code is entered.
Step 8) Do you want to enter any additional remote controller ID codes?
If so, unlock doors then repeat Step 6) and Step 7).
Step 9) When complete, open door, and check operation of remote.[/QUOTE]
So I did this and now my car wont start. Help please. I am stranded. And I'm an idiot for not trying this at home.
Inserting and Removing the Key from the Ignition 6 times in 10 seconds immobilizes the vehicle and renders all KEY FOBS useless. Want to really mess with someone's G or Nissan for that matter...insert your key in his/her car's ignition 6 times in 10 seconds.
After he starts crying perform the following procedure. It can also be used to add up to 5 Key FOBs to 1 Vehicle. This is useful when you want an aditional key or can be used to erase old FOB programming from vehicle in case you lose a key FOB.
KEY FOB ID CODE ENTRY PROCEDURE
Step 1) Sit in drivers seat, close and lock all doors.
Step 2) Insert key into and remove it from ignition key cylinder more than six times within 10 seconds. (Hazard warning lamps will then flash twice).
NOTE: Withdraw key completely from ignition key cylinder each time. If procedure is performed too fast, system will not enter registration mode.
Step 3) Insert key into ignition key cylinder and turn to ACC position.
Step 4) Push any button on remote controller once. (Hazard warning lamps will then flash twice). At this time, the oldest ID code is erased and the new ID code is entered.
Step 5) Do you want to enter any additional remote controller ID codes?
A maximum of five ID codes may be entered. If more then five ID codes are entered, the oldest ID code will be erased. If you do not want to enter any additional remote controller ID codes, go to Step 9).
Step 6) ADDITIONAL ID CODE ENTRY
Lock all doors with LH (driver side) lock/unlock switch (in main power window and door lock/unlock switch).
Step 7) Push any button twice on remote controller once, (Hazard warning lamps will then flash twice). At this time, the oldest ID code is erased and the new ID code is entered.
Step 8) Do you want to enter any additional remote controller ID codes?
If so, unlock doors then repeat Step 6) and Step 7).
Step 9) When complete, open door, and check operation of remote.[/QUOTE]
So I did this and now my car wont start. Help please. I am stranded. And I'm an idiot for not trying this at home.
Oh right. It's a 6MT. Which requires you to depress the clutch pedal to start the car. Let this be a lesson to everyone. Dont try cool G tricks in the University parking lot after a long night of Chemistry.
I opened my center counsle today and found this really sweet special feature. The lights is what origanally caught my attention. i then noticed several small buttons. i thought i would try pushing one was a was driving down the street. suddenly my car got really fast. It took me by surprise. So i took a picture to explain. This is by car the best feature i have found yet!


