ok so the lights in that first link are the ones i can use for my corner lights right?

the 168 WEDGE XTREME WHITE 5W or the 168 WEDGE SUPER WHITE-5W
(what looks better and matches better with the rest of the OEM lights)

i have the PIAA white/white LED's, IMO they match the HIDs pretty well, they have a slight hint of blue, but i've seen the wedge bulds and they arent bright enough
BTW import performance warehouse is awsome, i've ordered all my bulbs from them, every order has been received w/in 3 days at most

will the PIAA 168 Extreme Super Whites look good if i still have my stock bulb in the clearance strip?

btw whats up with the leds i know they are better but is it as easy to put in as a bulb?

heres the set-up with 6000K and the blue white super bright LED. the markers actually dont seem to match in the picture but look very close in person. RX

no remove the wheel liner and hit it from the rear (lol)

LED's are just as easy to install, they actually look almost just like the 168's. with out the lights in the clearance they wont match, i suggest you change both to LEDs

I did my Clear corners and High beam/fog bulbs last night

I just jacked the car, removed the wheel, popped off the inner front fender well/guard
(which is like 7 or 8 10mm nuts underneath, 7 or 8 of the plastic push rivets, and a 1 philips screw,

I then had access to the entire Headlamp assy, and the clear corners were about 30 seconds each at that point.

I put in the PIAA Super Plasma GT-X - I am fairly pleased.
The factory High beams are just sad, and aweful yellow.
The Fogs are also too yellow.
The new bulbs the brights are a lot better, and both beams are much whiter

i did it last night too without taking wheel off or jacking car. i removed the 5 clips and one screw then popped it down and got my hand in there.. the clearance light fells like it has a metal rod comming out of it thats how you know your touching it

So 4 & 5 are both 168? This link is causing me some confusion http://www.sylvania.com/ConsumerProd...RG-Results.htm
It says that
Front sidemarker is 194
and
Parking light is 168 ?

Then there is this.... http://www.eautoworks.com/html/bulbS...1-INFINITI.htm
Which doesn't list a 168 bulb... maybe 2 vs 4 door?

Nah.. 194 = 168 = same thing.. wedge type bulb

I'm new to this thread, and it started out great but got increasingly confusing. Hoping to tame the monster, can we say that the above quote is still correct? Other issues that came up, were (1) that some of these could be replaced with LEDs, and (2) that some of these (i.e. number three) are very difficult to replace

How is 168 and 194 the same? There has to be a difference or else it would be the same number. It is confusing and I still need to figure out if I need the 7443 dual or the 7440 single filament. Someone who has changed these please clarify!!!!

168 and 194 are the same. 194 has a slightly thicker base, but it will fit into a 168 just fine.