Picked up my new 07 Coupe this week and was reading through the manual. Got to the page were it tells you how to set the zone for the compass. Noticed I was set to the SC zone, and since I'm in GA, decided to switch it over. Did exactly what it said, hold compass button, turn key to on, hold till it displayed the zone number (was zone 8) and cycle through until you get to the right zone (i'm at 7 now). After a few seconds the zone # went away and instead of seeing the normal N/S/E/W and heading it just displayed - - - (blinking). So I flipped the page and saw the reset procs for the compass, press and hold until - - - blinks (which is what I get all the time now) and do a few circles nice and slow (i.e. 3 mph). No luck still blinking - - -. Anyone got any ideas?

TIA

 

eventually it will stop

mine took 3 days

 

Keep going. Make sure all your stuff is off (lights, HVAC, radio) and don't stop until the compass shows the display.

and stay slow, it took me about 2-3 minutes ( it feels like 10 minuts becasue you're going so slow.

And make sure there are no buildings around...