Do you need custom CF parts?
Thread Starter
|
Registered User
Joined: Mar 2004
Posts: 41
Likes: 0
Re: Do you need custom CF parts?
that wing is very similar to what i had in mind for the G35. if you guys like it, we can make it.
as for the reverse scoop hood, if we were to make one, it would be beneficial to both you, the consumer, and to us, the manufacturer, to keep the scoop design simple, b/c the more complex it is, the higher to cost of the hood would be.
Rever, we're with you. we'd like to get started on this right away. we don't spend too much time on sketches but once there's an idea, or a photoshop model, we start building a plug for the part. Barring anything with hard 90 degree angles, we can make most parts.
so you guys find something that would sell at least 20 pieces and we can get started on it. our prices will be very reasonable and our quality is second to none!
as for the reverse scoop hood, if we were to make one, it would be beneficial to both you, the consumer, and to us, the manufacturer, to keep the scoop design simple, b/c the more complex it is, the higher to cost of the hood would be.
Rever, we're with you. we'd like to get started on this right away. we don't spend too much time on sketches but once there's an idea, or a photoshop model, we start building a plug for the part. Barring anything with hard 90 degree angles, we can make most parts.
so you guys find something that would sell at least 20 pieces and we can get started on it. our prices will be very reasonable and our quality is second to none!
Mad eyed G
Joined: Jul 2003
Posts: 377
Likes: 0
From: Philadelphia, PA
Re: Do you need custom CF parts?
I really doubt you'll get 20 people to buy a custom cf piece of the same item, unless you mean 20 cf pieces in which they all don't have to be the same item. I, for one, would like a cf grille.
G35c/IP/G/6MT
G35c/IP/G/6MT
Registered User
Joined: Mar 2004
Posts: 317
Likes: 0
From: Scottsdale, AZ
Re: Do you need custom CF parts?
I think everyone will agree with me when I say that all I want is this hood for my G Coupe.
2004 G35 Coupe 6MT | Obsidian Black/Graphite | Premium | Aero | Splash Guards | XM Radio | Z Tube | JWT Pop Charger
2004 G35 Coupe 6MT | Obsidian Black/Graphite | Premium | Aero | Splash Guards | XM Radio | Z Tube | JWT Pop Charger
Registered User
Joined: Mar 2004
Posts: 317
Likes: 0
From: Scottsdale, AZ
Re: Do you need custom CF parts?
One more try.
<a href>http://fp3.antelecom.net/skankinlee/...s/DSCN3931.htm</a>
2004 G35 Coupe 6MT | Obsidian Black/Graphite | Premium | Aero | Splash Guards | XM Radio | Z Tube | JWT Pop Charger
<a href>http://fp3.antelecom.net/skankinlee/...s/DSCN3931.htm</a>
2004 G35 Coupe 6MT | Obsidian Black/Graphite | Premium | Aero | Splash Guards | XM Radio | Z Tube | JWT Pop Charger
Thread Starter
|
Registered User
Joined: Mar 2004
Posts: 41
Likes: 0
Re: Do you need custom CF parts?
that's a nice looking hood!
do you guys think we could get at least 10 people on a hood group buy?
for a smaller part like a spoiler or engine cover, or interior piece, we'd like to sell at least 20 pieces but on a larger piece like a hood, we could bring that down to a 10 piece minimum.
please understand that these minimum #'s helps us to cover our initial fabrication cost, and from a manufacturer's standpoint, it's not a good investment to make a mold for a piece that might not even sell 10 pieces.
do you guys think we could get at least 10 people on a hood group buy?
for a smaller part like a spoiler or engine cover, or interior piece, we'd like to sell at least 20 pieces but on a larger piece like a hood, we could bring that down to a 10 piece minimum.
please understand that these minimum #'s helps us to cover our initial fabrication cost, and from a manufacturer's standpoint, it's not a good investment to make a mold for a piece that might not even sell 10 pieces.
Charter Member Florida G35 Club
iTrader: (8)
Joined: Sep 2003
Posts: 1,030
Likes: 0
From: Boca Raton, FL
Re: Do you need custom CF parts?
Is that owner of the red G35 with the red CF hood on this forum? I want to know what side skirts those are, if any, I can't tell. Thanks!
Ivory Pearl / 6MT / Aero / Premium / Xenon Lights Everywhere / Mirror Tint / Injen CAI / Injen SES Exhaust / Tanabe Racing Springs / Ground Wire Kit / Apex'i S-AFC II
Ivory Pearl / 6MT / Aero / Premium / Xenon Lights Everywhere / Mirror Tint / Injen CAI / Injen SES Exhaust / Tanabe Racing Springs / Ground Wire Kit / Apex'i S-AFC II
Registered User
Joined: Feb 2004
Posts: 182
Likes: 0
From: San Diego California
Re: Do you need custom CF parts?
yes!!!!!! do what this guy says. A new grille!!! like data systems or gialle.
we need a better selection of grilles!
i will buy one.
exhuast, intake, Clear Bra, Race pedals, momo ****, Eibach Sway Bars & Springs, Piaa 4150k, 15% tint, Bronze Volks CE28N 19" 245/275-30,
Custom Leather Interior
216494-g35 015.jpg
we need a better selection of grilles!
i will buy one.
exhuast, intake, Clear Bra, Race pedals, momo ****, Eibach Sway Bars & Springs, Piaa 4150k, 15% tint, Bronze Volks CE28N 19" 245/275-30,
Custom Leather Interior
216494-g35 015.jpg
Registered User
Joined: Feb 2004
Posts: 182
Likes: 0
From: San Diego California
Re: Do you need custom CF parts?
oh i would also buy a front spliter for the front bumper
exhuast, intake, Clear Bra, Race pedals, momo ****, Eibach Sway Bars & Springs, Piaa 4150k, 15% tint, Bronze Volks CE28N 19" 245/275-30,
Custom Leather Interior
exhuast, intake, Clear Bra, Race pedals, momo ****, Eibach Sway Bars & Springs, Piaa 4150k, 15% tint, Bronze Volks CE28N 19" 245/275-30,
Custom Leather Interior
Registered User
Joined: Mar 2004
Posts: 8
Likes: 0
From: N.Y. L.I.
Re: Do you need custom CF parts?
You can put me in for one full engine cover. O what is going to the price. What about making Cf battery and brake line covers. The Brake line cover is the one that nissan for got to make for the car. LOLOL
