G35 crank no start
Thread Starter
|
Registered User
Joined: Feb 2023
Posts: 1
Likes: 0
G35 coupe 6mt
G35 crank no start
G35 crank no start. It has no communication with the ecm but I somehow got 2 codes u1000 and c1136. Car was running really rought and after I pulled coil packs the car would not start after that. I’ve replaced the ecm twice and I think it may be frying them. Any ideas? Car started running rough a little after clutch was replaced. Also security light is solid red anytime key is in ignition
BANNED!!!
Joined: May 2017
Posts: 14,837
Likes: 2,497
From: Washington State
Coupe 6MT Premium RAS
How are you programming the ECM/BCM and keys when you replace the ECM?
Solid red NATS indicator means the BCM doesn't recognize the key and this will prevent the injectors/coil packs from firing, this is likely your crank no start cause.
Are you sure you didn't mix up the coil pack harnesses? It's easy to do.
Solid red NATS indicator means the BCM doesn't recognize the key and this will prevent the injectors/coil packs from firing, this is likely your crank no start cause.
Are you sure you didn't mix up the coil pack harnesses? It's easy to do.
Thread
Thread Starter
Forum
Replies
Last Post
