what kind of motordyne spacer do I need for 05 auto
#1
#2
You'll need a 1/2" plenum spacer and (for the best result get the) ISO thermal kit. The install takes about 1-2hrs using basic tools.. as for feeling the gains.. it depends.. if you drive like a normal sane person.. then probably not.. the only thing you'll notice is that the car is louder lol..
but yeah there is a 9-15whp gain (Dynapack proven) so you'll be the judge.. but the dyno and 1/4 mile will show you the gain
but yeah there is a 9-15whp gain (Dynapack proven) so you'll be the judge.. but the dyno and 1/4 mile will show you the gain
#7
Trending Topics
#8
#10
#11
Originally Posted by ISMSOLUTIONS
I have an 05 Auto - 1/2" with ISO thermal Rocks - MREV+ also rocked the car - call and talk to Tony about it - I just did my MREV+ on my Auto - Tony knows the details.
No downside - install on the spacer is about an hour.
Rick
No downside - install on the spacer is about an hour.
Rick
or mrev plus for auto
#13
#14
I just put on the 5/16 spacer, ztube & popcharger on my 05 auto two days ago. I wanted to keep the cover (didn't think losing it was worth 1 to 2 horsepower with the 1/2inch).
The sound, with all three items, is really nice at higher rpms. It's not like your going to smoke the tires now but I'd do it again.
The sound, with all three items, is really nice at higher rpms. It's not like your going to smoke the tires now but I'd do it again.
#15
Originally Posted by ISMSOLUTIONS
I would only do the 1/2" with ISO Thermal for Spacer - MREV+ will give you some additional gains....I have extreme mods - and until there are stock dyno's out - I would hold off on MREV+....
Rick
Rick