245/40/18 of diameter for tire size?
#1
245/40/18 of diameter for tire size?
I posted a question about the best tire size for my new wheel, 18-8 volk progressive ME and I have got some responses from you guys. However, It did not make sense to me, so I could not buy tires today.
I want get front tire 225/45/18 and rear tire 245/40/18.
Is there anyone who knows 245/40/18 of diameter for tire size?
Also, 225/45.18 for front and 245/40/18 for rear will be a good balance? - I don't want to get my new wheels rubbing fenders.
225/45/18 25.9
235/45/18 26.3
245/45/18 26.6
245/40/18 ?
I want get front tire 225/45/18 and rear tire 245/40/18.
Is there anyone who knows 245/40/18 of diameter for tire size?
Also, 225/45.18 for front and 245/40/18 for rear will be a good balance? - I don't want to get my new wheels rubbing fenders.
225/45/18 25.9
235/45/18 26.3
245/45/18 26.6
245/40/18 ?
#3
#4
Registered User
iTrader: (9)
Join Date: Oct 2005
Location: Dallas, TX
Posts: 1,106
Likes: 0
Received 0 Likes
on
0 Posts
This should help, you can plug in different sizes and see how they compare:
http://www.1010tires.com/TireSizeCalculator.asp
http://www.1010tires.com/TireSizeCalculator.asp
#7
Hey Guys,
First off, I don't mean to hijack the thread but I figured it would be better than starting a new one.
In regards to offsets, is the higher offset, say +40, going to move the rim closer to the inside of the fender or closer to the outside of the fender?
I am thinking about getting an 18x8 rim with a +40 offset front and rear with a 245/45-18 tire. I am running the unrevised 350z springs too. I have read the charts and looked at the diagrams and it looks ok to me but I would like to hear that from you experienced guys.
Thanks.
First off, I don't mean to hijack the thread but I figured it would be better than starting a new one.
In regards to offsets, is the higher offset, say +40, going to move the rim closer to the inside of the fender or closer to the outside of the fender?
I am thinking about getting an 18x8 rim with a +40 offset front and rear with a 245/45-18 tire. I am running the unrevised 350z springs too. I have read the charts and looked at the diagrams and it looks ok to me but I would like to hear that from you experienced guys.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post