trunk release button retrofit?
#16
03-18-2008, 01:36 PM
Join Date: Mar 2008
Location: Washington, D.C.
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
That is my trunk, and I even have the glove box switch to disable.
http://flickr.com/photos/mikehill33/...7604117977887/
I'll see if I can get it installed, especially if it is just splicing a wire.
Gonna pop the empty cap off tonight, and see what's in there.
http://flickr.com/photos/mikehill33/...7604117977887/
I'll see if I can get it installed, especially if it is just splicing a wire.
Gonna pop the empty cap off tonight, and see what's in there.
#17
02-23-2021, 09:20 AM
Early 03 g35 trunk switch retro fitted
Since this is in the sedan section, I'm not sure this applies to the coupe
03.0 sedans did not come with a trunk release switch/button on the interior. They did not become available till the 03.5 model. You should be able to buy the switch/button from your dealer (or PM Tony@riversideinfiniti)
I retro fitted my 03.0 sedan with one as well as an extra DC outlet.
03.0 sedans did not come with a trunk release switch/button on the interior. They did not become available till the 03.5 model. You should be able to buy the switch/button from your dealer (or PM Tony@riversideinfiniti)
I retro fitted my 03.0 sedan with one as well as an extra DC outlet.
#18
02-23-2021, 09:29 AM
Early 03 G35 trunk switch retro fit
hey did you ever figure out how to do this, I’m trying to do the same thing. Switch to the 04 trunk without the switch in the handle and put a trunk switch by the dimmer n vdc switch. Please let me know
#19
02-23-2021, 10:02 AM
Join Date: May 2017
Location: Washington State
Posts: 14,817
Received 2,473 Likes
on
2,164 Posts
Coupe 6MT Premium RAS
#20
02-23-2021, 12:05 PM
#21
02-23-2021, 01:28 PM
Join Date: May 2017
Location: Washington State
Posts: 14,817
Received 2,473 Likes
on
2,164 Posts
Coupe 6MT Premium RAS
Ok I just checked the FSM, on the existing glove box trunk disable switch intercept/C-tap the PINK wire, run it to one side of your new trunk release switch, take the other side of the switch and run it to any chassis ground point.
When the BCM sees ground on that circuit it actuates the trunk lock mechanism.
Don't intercept the BLUE wire on the existing trunk disable button or it will no longer disable the trunk release for the new button.
When the BCM sees ground on that circuit it actuates the trunk lock mechanism.
Don't intercept the BLUE wire on the existing trunk disable button or it will no longer disable the trunk release for the new button.
#22
02-23-2021, 02:48 PM
Ok I just checked the FSM, on the existing glove box trunk disable switch intercept/C-tap the PINK wire, run it to one side of your new trunk release switch, take the other side of the switch and run it to any chassis ground point.
When the BCM sees ground on that circuit it actuates the trunk lock mechanism.
Don't intercept the BLUE wire on the existing trunk disable button or it will no longer disable the trunk release for the new button.
When the BCM sees ground on that circuit it actuates the trunk lock mechanism.
Don't intercept the BLUE wire on the existing trunk disable button or it will no longer disable the trunk release for the new button.
Thread
Thread Starter
Forum
Replies
Last Post
Eagle
Body, Interior, Exterior & Lighting (DIY)
2
05-04-2009 04:11 AM
