^Hmmm... maybe it's not 03/04... maybe it's just the ones with halogen


--edit: I just checked Sylvania's website, and it said 7440 for all G35 blinkers.

 

I think I have some from VLED at home... I'll try to remember to check over the weekend - I'm not using them so will sell cheap if you want 'em.

 

So I've toyed around with it, and the clunking is coming from the driver's side rear wheel well. I can make it clunk when I put down on the car from the inside of the trunk.

Could it be a strut mount going bad? If it is, what kind of expense can I expect for repair?

 

From sticky "Look here before starting a new thread"

Description----------------Bulb Type
HID Low Beam-------------HID-D2R
Non-HID Low Beam --------H1
Fog / High Beam-----------H4 / 9003
Reverse Light--------------W2 / 921
License Plate Light---------168 / 194
Clearance Light------------168 / 194 (03/04 only)
Side Marker---------------168 / 194
Interior Trunk Light -------158 / 168 / 194
Map Lights----------------T6 / DE3175
Dome Lights---------------T6 / DE3175
Step Light-----------------T6 / DE3022
Front Turn Signal----------7440 (03/04 only)---7443 (05/06 only)
Rear Turn Signal-----------7440 (03/04 only)---7443 (05/06 only)

 

You sure you want and LED Ashley? Did you mod your turn signals to blink also? If you did, you may need a load resistor or you will get the really fast blinkage goin on

 

I have the LEDs and load resistor Ash (all from VLED)... I'll dig 'em out over the weekend and take pics, and look up the part numbers so you know which ones they are...

Or not - if you're not interested...

The reason I have them is they were gonna go in side markers - they are too big (and I dont have side markers any more)... but they should fit good in front turn signals.

 

anybody knows what type of dog this is??

 

Thanks for the help Chris and Mike.
Chris, no I haven't modded my marker lights (yet)

I think I may just go with these:


I made a projector lens to go in the blinker, and it REALLY pitches light out absolutely perfect from the amber incandescent 7440's I have in there now, so I don't want to risk messing up my perfect blinkers with LEDs
I had asked about LEDs before I realized how nice the spread is on the incandescent bulbs.

 

^^^ I'm using PIIA mirror amber (or something like that)... they are great for clear lens because they illuminate amber, but do not cast a yellow hue in the sunlight...

I'll look at the box for part number later (if needed).

 

wait, I don't get it... first you asked about LED but decided against them because you like what you have now... so why are you posting that you are going with "these"... seems to me like you have what you want already

 

Anyone know who's car this is?



Last pic from this thread: http://photography-on-the.net/forum/...d.php?t=841850

I think they're Algernon Intelesse? I'm in love, I want my sedan to look like that! Scratch that, I need my sedan to look like that.

 

^FlyingLumpia

I ran the same bulbs too Mike. The PIAAs are very nice but also like $40? I actually just gave them away a few weeks ago (sorry Ashley).

I think Ashley only has the orange bulbs right now which will reflect orange behind the lense. Getting the chrome will eliminate that.

 

His car is not BS though. His car looks likes Serengeti Sand. It has to be someone elses'

 

Nail'd it.

I have these right now:


The beam dispersion is 100% perfect, I just don't want the yellow cast in the sunlight.
I'm afraid switching to LEDs will make throw off the beam pattern since I have them behind projectors.
Right now it's all nice and perfectly even because all the light is coming from one filament, instead of a cluster of smaller light sources.
Make sense now?

The other question I had...
If I change my rear indicators to LED but the fronts are still incandescent, will I still need load resistors?

 

Looks like the result of the lighting/white balance.
Notice how much more purple the taillights look?