to tap into for high beam, or from projector?

 

Don't forget to remove engine mods before the dealer, if it's oil related issue, did you go too long on an oil change? Maybe the previous owner

 

On the OEM harness: Black=ground, Red=High-beam. Hook those to the solenoid and you're golden.

(Double check the polarity, I'm not sure if it makes a difference, but you should check anyway)

 

What is a fair price for curbed (no cracks, more than average curbed-ness) 18" G35 coupe wheels in gloss black?

 

Just ordered Berk high flow cats do i need any gaskets or anything before install or do they come everything I need? thanks

 

^You'll need to buy new gaskets for both ends

2.5k

 

^Read: $2.50

 

BTW, just letting you guys know that I have speakers for sale that fit the first gen sedan, i have a double din headunit for sale that fits it, I have coupe rear springs (for those that want to do the Z/G spring combo) and I have a polished plenum from SXEXCX.

Check my threads yO!

 

I've had my cats on/off several times - always reused gaskets... replacement is not necessary unless they are bent or otherwise damaged.

 

are yellow hids fogs blinding like 8000K hid fogs? i have 8000K top and bottom but the top ones are not blinding, i guess the bottom are cause they share the high beam location

 

^Yes, 3000k are still very bright and will be very blinding if not aimed properly.

I believe the solution is a bulb that has a shield on it to cut-off the upper part of the beam and make the fog light disperse light more like the low-beam.
Only thing is, you might not have high-beams anymore, depending on the type of bulb you use.
I'm not completely sure how all that works or what bulb to use though, as I have switched to projectors

 

guys am having badddd fuel odor in the car whenever i hit the pedal like full throttle or even halfway it smells really bad + relatively low mileage and the exhaust tips r black indicating rich a/f mixture, my g35 got jwt intake gutted cats power pulleys spacer and all other stock any ideas??

 

^Try putting your stock intake tube back on and reset the ECU.

 

About to order a part before i do can someone confirm what part this bushing is its right above my driverside tire

 

^How much you paying to get that done? I can get you the entire arm with bushing installed...