Don't forget to remove engine mods before the dealer, if it's oil related issue, did you go too long on an oil change? Maybe the previous owner

 

On the OEM harness: Black=ground, Red=High-beam. Hook those to the solenoid and you're golden.

(Double check the polarity, I'm not sure if it makes a difference, but you should check anyway)

 

What is a fair price for curbed (no cracks, more than average curbed-ness) 18" G35 coupe wheels in gloss black?

 

Just ordered Berk high flow cats do i need any gaskets or anything before install or do they come everything I need? thanks

 

^You'll need to buy new gaskets for both ends

2.5k

 

^Read: $2.50

 

BTW, just letting you guys know that I have speakers for sale that fit the first gen sedan, i have a double din headunit for sale that fits it, I have coupe rear springs (for those that want to do the Z/G spring combo) and I have a polished plenum from SXEXCX.

Check my threads yO!

 

I've had my cats on/off several times - always reused gaskets... replacement is not necessary unless they are bent or otherwise damaged.

 

are yellow hids fogs blinding like 8000K hid fogs? i have 8000K top and bottom but the top ones are not blinding, i guess the bottom are cause they share the high beam location

 

^Yes, 3000k are still very bright and will be very blinding if not aimed properly.

I believe the solution is a bulb that has a shield on it to cut-off the upper part of the beam and make the fog light disperse light more like the low-beam.
Only thing is, you might not have high-beams anymore, depending on the type of bulb you use.
I'm not completely sure how all that works or what bulb to use though, as I have switched to projectors

 

guys am having badddd fuel odor in the car whenever i hit the pedal like full throttle or even halfway it smells really bad + relatively low mileage and the exhaust tips r black indicating rich a/f mixture, my g35 got jwt intake gutted cats power pulleys spacer and all other stock any ideas??

 

^Try putting your stock intake tube back on and reset the ECU.

 

About to order a part before i do can someone confirm what part this bushing is its right above my driverside tire

 

^How much you paying to get that done? I can get you the entire arm with bushing installed...

 

i dont know yet i was trying to name this part so i can look into replacing it i believe my sho[ charges 153$ to press a bushing in and out but i need the name i believe its a control arm correct?