Random Little Question Thread
#3586
having an issue with rubbing, but fenders have been rolled and pinched almost paper thin, rears also rolled and pinched 19x8.5 +45 with 25mm spacer 245/35/19 and 19x9.5 +40 with 15mm spacer 245/35/19...i think what is rubbing is either the front screw or back screw (middle screw and clip removed) or both...can i just take out front screw and clip? dont want my fender liner to hang and eventually get ripped off...just need to get this damn rubbing to stop
#3590
so i replaced both my rear endlinks .. and installed my hotchkis sways finally lol
went to get the whiteline lower control arm bushings but they couldnt install them right away or do my alignment and i couldnt wait or go back that day.. so i bought the whiteline bushings ..n came home .. thinking il just get em installed locally ..
decided id go to a local good year for their free alignment check. figured why not ..
they said i needed a few adjustments to be back in spec and my stock L.C.A. bushings were in good shape . so i had them do the alignment and the car feels great . guess il install the L.C.A. bushings later on..... whene i upgrade more of my suspenion ..
=)
on a side note im getting that mysterious sound from the suspension .. probably the sways ...
went to get the whiteline lower control arm bushings but they couldnt install them right away or do my alignment and i couldnt wait or go back that day.. so i bought the whiteline bushings ..n came home .. thinking il just get em installed locally ..
decided id go to a local good year for their free alignment check. figured why not ..
they said i needed a few adjustments to be back in spec and my stock L.C.A. bushings were in good shape . so i had them do the alignment and the car feels great . guess il install the L.C.A. bushings later on..... whene i upgrade more of my suspenion ..
=)
on a side note im getting that mysterious sound from the suspension .. probably the sways ...
#3591
ill Sedan
iTrader: (87)
having an issue with rubbing, but fenders have been rolled and pinched almost paper thin, rears also rolled and pinched 19x8.5 +45 with 25mm spacer 245/35/19 and 19x9.5 +40 with 15mm spacer 245/35/19...i think what is rubbing is either the front screw or back screw (middle screw and clip removed) or both...can i just take out front screw and clip? dont want my fender liner to hang and eventually get ripped off...just need to get this damn rubbing to stop
#3595
#3597
i found this: http://www.dealextreme.com/p/50mm-18...s-optics-12834 which they have 50mm available and 66mm...i know they ususally have a little lip that can be shaved down if needed (around as a border)...i would like to put it in from the inside of the housing and have it sit flush with pressure