Random Little Question Thread
#4906
I can't really tell whats in the bag but it is the basic kit as there is no iso-thermal manifold gasket. Should be fine if its off a 350z as its the same motor and the cut out looks the same. I'd get the parts kit and the iso thermal gasket. Here's a link to motordynes website or you can use one of the vendors on the site
http://www.motordyneengineering.com/index.php?cPath=1_5
hope this helps.
http://www.motordyneengineering.com/index.php?cPath=1_5
hope this helps.
#4909
#4913
^ Clay Bar is only for use on clearcoated surfaced. If the clearcoat is pealing then dont use it. Only way it will take color off our cars if the clear coat is damaged. But you should notice it right away on the clay as it will turn (the color of your car)
on a side note
Oil Change, Brake Fluid Flush, Front Brake Re-lube, Spark Plugs, New stabilizer bar Endlinks left and Right - Complete!
Car feels amazing, but dreaded clanking sound over bumps remains
here are how my plugs(driver side Bank) look at 64k
Not bad but, they have been replaced
on a side note
Oil Change, Brake Fluid Flush, Front Brake Re-lube, Spark Plugs, New stabilizer bar Endlinks left and Right - Complete!
Car feels amazing, but dreaded clanking sound over bumps remains
here are how my plugs(driver side Bank) look at 64k
Not bad but, they have been replaced
Last edited by thescreensavers; 10-02-2011 at 01:31 AM.
#4916
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,299
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
#4917
#4919
#4920