Ok so i also found out that my battery tray is forever staying in the car. Acid from the battery ate off the top of the bolt holding it down haha but i also found out that if your having issues with clearance of the loom over the camber arm bc of the loom running to the horn. Run the loom on top of the black plastic piece that it ran under before. I will get a pic up later once i run by and get the electrical tape 12g and some beeeer.

 

^It ate off one of mine too. I just wedged a claw hammer under there and popped it through. It halfway broke part of the bolthead, and halfway pulled the hole in the plastic tray bigger. Either way, I got it off.

 

welp...since I'm not getting rid of the car anymore, I'll be making an attempt at this...again :/

 

^Very nice, take a bunch of pics John.

 

I will as soon as I get my P&S camera back from my friend. Sold the D60

 

I think this thread may have already been linked over, but adding another link won't hurt

-----> https://g35driver.com/forums/engine-...wire-tuck.html

 

Come on Kenny....let's do your main harness....then after we learn, we can do mine

 

chris if you want to help me do it im am totally down for it. only problem is we HAVE to get it done in a day because its my only car. i am taking 2 months off of work starting on the 20th of this month so anytime during that i should be free

 

^ two months?! lucky!

 

I'll hit you up after next week (waiting to find out some info that will effect my schedule) and we can talk over the details.

 

cant wait to start mine

hating this busy schedule i got..

 

soooo....I have a block on the driverside for the brakes. It obstructs the hole to run the harness through...

any ideas?

 

^Not sure what you're talking about.
Pic?

 

What we did was took a hole saw and drilled a hole in front of that box and put in a grommet..

 

U see those white clips?? We went to autozone and got clips that go in those holes and hold the harness.. They are called harness clips..