JDM Mirror Goodies
Already have these but that's far from a fix. It doesn't show anymore because it has the same problem the main mirror does, it only shows the mirror cover inside due to the angle the mirror is on....
Registered User
Joined: Jul 2013
Posts: 4
Likes: 0
thanks so much for checking that. I'm running mine the same as you now.
JDM on Left (driver side) and USDM on right (passenger side), the fold-in amount is almost dead even, the only viewing angle that is wrong is the Driver side. If we can find a way to correct the driver side viewing angle we're golden, personally I don't see a straightforward way to do that.
Thanks again for posting this is EXACTLY the confirmation I was waiting for before doing a write up.
JDM on Left (driver side) and USDM on right (passenger side), the fold-in amount is almost dead even, the only viewing angle that is wrong is the Driver side. If we can find a way to correct the driver side viewing angle we're golden, personally I don't see a straightforward way to do that.
Thanks again for posting this is EXACTLY the confirmation I was waiting for before doing a write up.
For our DRIVER side: try JDM base w/ USDM mirror.
Last edited by blubox; Aug 17, 2013 at 07:00 PM.
Yes you should be using the USDM mirror/glass on BOTH because the perception or whatever it's called is different side to side.
However this will not change the viewing angle.
However this will not change the viewing angle.
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM
