5AT trans cooler banjo bolt size needed.
Thread Starter
|
Registered User
Joined: Oct 2019
Posts: 11
Likes: 1
G35 Sedan, high compression,Poncams,exhaust,porting to heads and intake,lowered on coilovers,tuned
5AT trans cooler banjo bolt size needed.
I am needing to replace my trans cooler lines. I need to know the specs of the stock banjo bolt so i can order the parts needed to make an6 cooler lines going to my afternarket cooler.
Registered User
Joined: Sep 2019
Posts: 34
Likes: 1
G35x Premium Package
This is a project of mine too. You will need to take off the Y-pipe to gain access to the 17mm banjo bolts
https://www.infinitipartsdeal.com/pa...310_C002,21625
https://www.infinitipartsdeal.com/pa...310_C002,21625
Thread Starter
|
Registered User
Joined: Oct 2019
Posts: 11
Likes: 1
G35 Sedan, high compression,Poncams,exhaust,porting to heads and intake,lowered on coilovers,tuned
This is a project of mine too. You will need to take off the Y-pipe to gain access to the 17mm banjo bolts
https://www.infinitipartsdeal.com/pa...310_C002,21625
https://www.infinitipartsdeal.com/pa...310_C002,21625
for anyone looking I bought some m14x1.5 to -an6 and they fit fine.
Once again the banjo bolts are m14x1.5.
Registered User
Joined: Sep 2019
Posts: 34
Likes: 1
G35x Premium Package
Is the Megan Y pipe that different that it gives you access to the banjo bolts?
Thread Starter
|
Registered User
Joined: Oct 2019
Posts: 11
Likes: 1
G35 Sedan, high compression,Poncams,exhaust,porting to heads and intake,lowered on coilovers,tuned
its like the vq35hr or 370z Y pipe. On my car which is a rwd it doesn't block it at all. Actually iirc i ordered the 370z pipe when i bought it 3 years ago.
Thread
Thread Starter
Forum
Replies
Last Post
Phalanx
G35 Sedan V36 2007- 08
6
Oct 30, 2013 06:56 PM
djb703
G35 Coupe V35 2003 - 07
8
Mar 16, 2011 12:04 AM
senupi
Engine, Drivetrain & Forced-Induction
1
May 26, 2004 10:43 AM