Hello, I have had the unfortunate experience of rats chewing my harness.

I need help identifying the last two wires for repair.

im under the brake booster and the main harness going back into the firewall has a two wire shoot off almost immediately in the brake booster pocket. The wire colors are white and black, both with a silver stripe.

I'm assuming the black is a ground, but I have no idea where it connected originally. If someone could identify them and maybe take a few pics of the routing I'd be eternally grateful.

I will be soldering these, so don't worry lol!

 

Typically you can just keep removing wire loom until you find the other end of the wire.

 

Totally understand, yet these two wires had their own loom that I took off to begin repairing. I just can't find where they might go.

 

Well my G is sitting pathetically in the driveway all snowed in with a broken radiator so I'll go pop the hood and take a look.

 

Well I went out and took some pictures of the wiper motor wiring because that's initially what I thought it was, now I don't think so.

What all do you have plugged in? Should be the wiper motor, ABS relay with the 3 harnesses, brake fluid level, brake fluid pressure sensor, ABS motor, and the ABS solenoids in the block.

 

I found where the wires went! It is the master cylinder signal wires. I'm assuming to alert low brake fluid.
the rats had chewed all but an 1/8 of an inch sticking out from the connector..

I appreciate your time!

I had to take the booster put of the car along with the master cylinder which is why I didn't see it at first!

 

Moderator EDIT: Well that's a first, banned for botting a Turkish citizenship website...