G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Removing Resonator

Old Apr 21, 2006 | 05:40 PM
  #1  
gojc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 23
Likes: 0
Removing Resonator

I was at a local muffler shop asking about new exhausts/mufflers etc. and they recommended that I remove the resonator and put in a straight pipe. Anyone know what would happen if I did this?

I've got an 05 Sedan...
 

Last edited by gojc; Apr 21, 2006 at 05:45 PM.
Reply
Old Apr 21, 2006 | 06:03 PM
  #2  
Xman's Avatar
Registered User
iTrader: (2)
Joined: Oct 2003
Posts: 3,590
Likes: 0
From: NJ
You would lose about 30 lbs and the car would sound louder. If you get another muffler like an HKS it would sound even louder. My $0.02 FWIW.
 
Reply
Old Apr 21, 2006 | 08:46 PM
  #3  
Loe G35's Avatar
Registered User
Joined: Mar 2006
Posts: 226
Likes: 1
From: Sioux Falls, SD U.S.A
It will drone as well between 1,500-1,700rpm.
 
Reply
Old Apr 21, 2006 | 09:52 PM
  #4  
godmans's Avatar
Registered User
iTrader: (22)
Joined: May 2004
Posts: 2,239
Likes: 4
try sth like a straight thru resonator?
 
Reply
Old Apr 22, 2006 | 02:58 PM
  #5  
gojc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 23
Likes: 0
I ended up removing the stock resonator and putting on a Magnaflow resonator. I kept the stock muffler. I think it sounds pretty good...basically just enhanced the stock sound. I think the other pluses are it is much lighter than the stock resonator and flow is a little less restrictive. Total was a $100 out the door.
 
Reply
Old Apr 22, 2006 | 03:24 PM
  #6  
Neal376's Avatar
Registered User
iTrader: (1)
Joined: May 2005
Posts: 2,138
Likes: 1
From: Displaced New Yorker
that sounds like the best way to go about it. I planned on doing that awhile ago. Is it deeper, louder, raspier? Make us a sound clip.
 
Reply
Old Apr 22, 2006 | 03:30 PM
  #7  
99atlantic's Avatar
Registered User
Joined: Jan 2003
Posts: 1,703
Likes: 1
this is what happens when u pull it on the coupe, no idea about a sedan - http://videos.streetfire.net/search/...119B56414B.htm
 
Reply

Trending Topics

Old Apr 22, 2006 | 08:44 PM
  #8  
gojc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 23
Likes: 0
Actually, they removed the stock resonator initially and put in a straight pipe, it sounded raspy and I didn't care for it. So, they put in the Magnaflow resonator and it basically took care of the issue.

The sound is deeper at all rpm's...it's kind of hard to describe but I would say it is a deeper version of the stock sound. Doesn't completely change the stock sound like a new muffler would, just enhances what you already have.

Regarding the sound clip, I don't have the equipment to do that right now...also, I don't think sound clips actually help much. I think trial an error regarding sound works best.

Try going to your local shop and see if they will make you a deal, if you don't like the sound coming out with the new resonator, see if they will weld the stock one back on included in the original quote.

If you do decide to do it, let us know what you think...I really like mine.
 

Last edited by gojc; Apr 22, 2006 at 08:50 PM.
Reply
Old Apr 23, 2006 | 12:24 AM
  #9  
Neal376's Avatar
Registered User
iTrader: (1)
Joined: May 2005
Posts: 2,138
Likes: 1
From: Displaced New Yorker
ok, so its confirmed. Removing the stock resonator creates rasp. Pre Mufflers are meant to absorb high pitched noise, so it really is not much of a surprise. Alright. I think I will do that, get a magnaflow.
 
Reply
Old Apr 23, 2006 | 12:55 AM
  #10  
gojc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 23
Likes: 0
For me, it was the way to go. I was going to go with a full cat back exhaust but for 7-8 rwhp, (according to several dynos on this forum) it wasn't worth it. I still wanted a fuller exhaust note and this option worked. If the dynos on the (to be created) Fast Intentions exhaust for the sedan show significant rwhp, I might go that route. But for now, this works...
 
Reply
Old Apr 24, 2006 | 07:11 AM
  #11  
JustBrilliantX's Avatar
Misanthropic nut-cracker
iTrader: (3)
Joined: Dec 2004
Posts: 803
Likes: 0
From: On the water at the "Jersey Shore"...Toms River
What did you think about the all the variables when ya checked out the search engine under Mid-pipe or middy?
 
Reply
Old Apr 25, 2006 | 04:19 PM
  #12  
RX7_schlep's Avatar
Registered User
Joined: Apr 2005
Posts: 1
Likes: 0
I've tried using the Magnaflow 22" resonator with the stock muffler on my 5AT G35 and had noticable droning at ~2200 rpm. After about 2 weeks I removed the Magnaflow and went back to the stock resonator since 2200rpm was around where the rpms sit when cruising around town or on the highway but YMMV.
 
Reply
Old Apr 26, 2006 | 01:36 AM
  #13  
gojc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 23
Likes: 0
For some reason I don't notice the drone. I drive from the Sacramento area to the SF Bay area once a week and there was no difference for me on the hwy. I don't think they installed the 22" resonator on my car...it seemed shorter actually. The one thing I notice about these forums is really...to each his own...
 
Reply
Old Apr 26, 2006 | 10:45 AM
  #14  
Loe G35's Avatar
Registered User
Joined: Mar 2006
Posts: 226
Likes: 1
From: Sioux Falls, SD U.S.A
My 18" resonator droned at 1,500-1,700rpm. I have since replaced it with a coupe middy. It still drones, but its not annoying or loud and is acceptable.
 
Reply
Old Mar 30, 2017 | 12:33 AM
  #15  
Blue Dream's Avatar
I drove ttrank's car solo
iTrader: (50)
Joined: Mar 2009
Posts: 18,299
Likes: 1,488
From: By the sea, Tx
G35 sedan w/ too much money in mods
Premier Member

lolol gojc hasn't logged in here in over 7 years, plus he wasn't talking about replacing the muffler like the vid you posted. He was talking about replacing the stock resonator but thanks for trying to be helpful.......
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
davizzle
Video Share
5
Jan 31, 2017 04:00 PM
Red G Coupe
Tuner & Dyno
9
Jan 14, 2016 01:13 AM
dcsbh1
Brakes & Suspension
0
Oct 1, 2015 03:15 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:12 AM.