G35 Sedan V36 2007- 08 Discussion about the 2nd Generation G35 Sedan 2007 - 08

bluetooth delay on incoming calls?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Sep 16, 2008 | 05:16 PM
  #1  
applehj's Avatar
Thread Starter
|
Registered User
Joined: Sep 2007
Posts: 10
Likes: 0
bluetooth delay on incoming calls?

Hi, guys, I have an 07 G sedan w/o Nav, my iPhone works well with the bluetooth, except when I receives an incoming call, it takes 6~7 seconds before I can start a conversation, but once it connects, the conversation is of good quality. Is it normal? Anybody experience this?

Edit: the latest firmware 2.1 for iPhone has solved this problem for the 1st Gen iPhone that I own (very likely also applies to the 2nd Gen phone).
 

Last edited by applehj; Sep 23, 2008 at 07:22 PM.
Reply
Old Sep 16, 2008 | 05:23 PM
  #2  
jerminator's Avatar
Registered User
iTrader: (1)
Joined: May 2006
Posts: 170
Likes: 0
From: Austin TX
I don't think the delay is that long in my car.
 
Reply
Old Sep 16, 2008 | 06:25 PM
  #3  
frybecker's Avatar
Registered User
Joined: Aug 2007
Posts: 42
Likes: 0
From: Fontana, CA
bluetooth delay on incoming calls?

I have the same issue with my iphone. When I answer the phone it flips to the radio for about 5 seconds and then back to phone mode.
It started doing this after the first software ugrade from apple.
 
Reply
Old Sep 16, 2008 | 08:02 PM
  #4  
jazzjit23's Avatar
Registered User
Joined: Sep 2008
Posts: 39
Likes: 0
From: Chicago
I don't think I have this issue, but I have noticed that even though I have programmed someone's number in the phone book, it still shows up as a private caller. Any thoughts?!
 
Reply
Old Sep 16, 2008 | 08:45 PM
  #5  
applehj's Avatar
Thread Starter
|
Registered User
Joined: Sep 2007
Posts: 10
Likes: 0
Originally Posted by frybecker
I have the same issue with my iphone. When I answer the phone it flips to the radio for about 5 seconds and then back to phone mode.
It started doing this after the first software ugrade from apple.
exactly. I have been to dealer twice, and they just say it's normal. but seems like not everybody has this issue.
 
Reply
Old Sep 16, 2008 | 08:52 PM
  #6  
applehj's Avatar
Thread Starter
|
Registered User
Joined: Sep 2007
Posts: 10
Likes: 0
Originally Posted by jazzjit23
I don't think I have this issue, but I have noticed that even though I have programmed someone's number in the phone book, it still shows up as a private caller. Any thoughts?!
hey jazzjit23, what phone do you have? if iPhone, what software version is it?
I think in order to have a name show up, you will have to use "transfer entry" from your phone instead of using voice command when you set up an entry. I am using a Samsung just for transfering entry. I replace my iPhone with this Samsung, transfer all the entries one by one, and replace it back to iPhone. hope this helps.
 
Reply
Old Sep 16, 2008 | 09:05 PM
  #7  
G35Now!'s Avatar
Moderation-free
Staff Alumni
iTrader: (3)
Joined: Nov 2006
Posts: 3,754
Likes: 8
From: The US of A
Yep - it's a compatibility issue between Bluetooth 2.0 (iPhone) and 1.x (the G). My Razor never did it, but both of my iPhones have.
 
Reply
Old Sep 16, 2008 | 09:08 PM
  #8  
jazzjit23's Avatar
Registered User
Joined: Sep 2008
Posts: 39
Likes: 0
From: Chicago
Originally Posted by applehj
hey jazzjit23, what phone do you have? if iPhone, what software version is it?
I think in order to have a name show up, you will have to use "transfer entry" from your phone instead of using voice command when you set up an entry. I am using a Samsung just for transfering entry. I replace my iPhone with this Samsung, transfer all the entries one by one, and replace it back to iPhone. hope this helps.
Hey applehj, I have a Samsung as well (A900M). I actually manually added these entries to the phonebook and setup a voice command for each name. When the person calls, it shows up as private but when it connects, it then shows the person's name. Any thoughts? You think if I do the phone transfer way it'll work?
 
Reply
Old Sep 16, 2008 | 09:41 PM
  #9  
applehj's Avatar
Thread Starter
|
Registered User
Joined: Sep 2007
Posts: 10
Likes: 0
Originally Posted by jazzjit23
Hey applehj, I have a Samsung as well (A900M). I actually manually added these entries to the phonebook and setup a voice command for each name. When the person calls, it shows up as private but when it connects, it then shows the person's name. Any thoughts? You think if I do the phone transfer way it'll work?
mine is a non-Nav, so I am not sure how different is it between the Nav and nonNav. for me, when add an entry to the phonebook, I have only two options: enter the number digit by digit using voice command, or transfer from my phone. I have to use the latter in order to have the name showed.
 
Reply
Old Sep 16, 2008 | 09:50 PM
  #10  
applehj's Avatar
Thread Starter
|
Registered User
Joined: Sep 2007
Posts: 10
Likes: 0
Originally Posted by G35Now!
Yep - it's a compatibility issue between Bluetooth 2.0 (iPhone) and 1.x (the G). My Razor never did it, but both of my iPhones have.
Thanks, G35Now!. so seems like there is no solution. it's kinda annoying having to wait every time to answer a call. Especially think about the new phones are all bluetooth 2.0, but no way I would go back to an old phone.
 
Reply
Old Sep 17, 2008 | 02:41 AM
  #11  
razo168's Avatar
Registered User
iTrader: (3)
Joined: Oct 2005
Posts: 326
Likes: 0
From: Los Angeles, CA
answer the call with your phone instead of your car and you wont have that delay..

the only resolution so far =(
 

Last edited by razo168; Sep 17, 2008 at 02:42 AM. Reason: typo
Reply
Old Sep 17, 2008 | 02:01 PM
  #12  
herschelg123's Avatar
Registered User
Joined: Jan 2007
Posts: 104
Likes: 0
From: Chino, CA
Me too!

Originally Posted by frybecker
I have the same issue with my iphone. When I answer the phone it flips to the radio for about 5 seconds and then back to phone mode.
It started doing this after the first software ugrade from apple.

+1

Same problem here. Another user posted a solution. Press answer from the phone instead of the steering wheel to eliminate this problem. My phone is usually not within reach, which is why I use the steering wheel. But I will be sure to try this new technique next time I am in the car.
 
Reply
Old Sep 17, 2008 | 05:18 PM
  #13  
applehj's Avatar
Thread Starter
|
Registered User
Joined: Sep 2007
Posts: 10
Likes: 0
Originally Posted by razo168
answer the call with your phone instead of your car and you wont have that delay..

the only resolution so far =(
Originally Posted by herschelg123
+1

Same problem here. Another user posted a solution. Press answer from the phone instead of the steering wheel to eliminate this problem. My phone is usually not within reach, which is why I use the steering wheel. But I will be sure to try this new technique next time I am in the car.
I will try that. I usually leave my phone in the pocket when driving. it would take more than a few seconds to take it out and press the button. hopefully infiniti (or apple) can come up with some solution soon.
 
Reply
Old Sep 17, 2008 | 08:19 PM
  #14  
AesonVirus's Avatar
Registered User
iTrader: (62)
Joined: Mar 2007
Posts: 6,881
Likes: 85
From: Central MA
I had a Motorola Razr and never noticed this delay.
I just recently moved to a LG Dare and I now see this delay as well.
It's not 5 seconds long, but there is a blip between the phone ringing and answering where the system goes back to the radio, but it's only a second at most.
 
Reply
Old Sep 17, 2008 | 08:25 PM
  #15  
MiniRX7's Avatar
Registered User
iTrader: (2)
Joined: Apr 2005
Posts: 186
Likes: 0
Happens to me on my HTC Tytn2 running custom ROM... i answer via phone and its a lot less delay
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 02:01 PM.