My springs are getting put in on thu.
the drop is 1.5 and 1.4

not to much of a drop but i dont want more. Now my question is with a drop so minumual do would i have to get the camber kit or w.e is called

im going to be riding on my stock rims....

 

actually that is a pretty decent drop... imo... and you will have increased NEG. camber on all corners,,, at least i did on mine... It will look nice, no question,, i run around on my stock 17's , and when i auto-x i swap my 18's on...

 

Did u end up getting a camber kit....

 

I'm dropped on Eibach and no camber kit.

 

How's alignment?

I know that once you get lowered pass an inch it's reccomended to get a rear camber kit at least. I'm planning to get rear camber kit alone when my BC arrives.

 

Im getting alignment done as soon as i drop it

 

wait a couple weeks/miles to get your alignment because you need to allow the springs to settle

 

Same here. I'm under 2* negative camber at all 4 corners, just enough to make it handle better without risking my tires.