Hello everyone,

I just wanted to know what the perfect offset is on a
2007-08 G35 V36, without having to roll the fenders???

 

Need rim width, and intended tire widths.

 

And ride height and camber settings.

 

and perhaps intended alignment specs (camber)

btw, fender are pretty much rolled from the factory. Just run your fingers along the edge sometime.





EDIT: guess candlestick types faster

 

Depends what look your going for. There are a lot of variables as well like wheel widths, amount of drop, amount of camber, tire specs, ect... Check out the Word file that Terry put together in the link below. You can see what others have gone with and then make a decision from there. After a lot of research I decided on 20x9 +25 in front and 20x10 +35 in the rear so I'll find out how I did in about 6 weeks. GL

https://g35driver.com/forums/v36-bra...ims-tires.html

 

Cool ty guys, ill look at that thread.
But yeah i was looking at a clean looking drop
And rim size. About a 2" drop, 20x8.5 F, 20x10 R.

Edit: oh tire size 245/35 F, 275/30 R.
If 19" 245/40 F, 275/35 R.

 

Depends on your overall drop and camber settings, somewhere in the range of +20 to +34 for the front and +32 to +40 for the rears should work.

 

I actually changed my mind and am going to try +42 in the rear... +35 would be close to a 1/4" of poke I think. +42 should be close to flush

 

The fenders are pre-rolled. +35 is stock set up

 

It's +45 and +50 for the stock sport 18s, IIRC.

 

+25 in the rear. Are you going to run stretch tires? I have a 245/35/19 in the rear