Dash board light question and HID question
Dash board light question and HID question
Ok after bad luck since yesterday trying to install 2 HID lights i broke something inside my headlight that the clip holds the bulb down with or whatever... broke kinda easily now i had to improvise on how to keep the bulb steady.. so i gave up on putting them in and put the factory ones back in.. 
so it working for now and holding it in place... but the thing is i dont know if its going to cost me buying a whole new headlight to get that little part inside fixed.... or can i just replace that little part inside of the HID assembly???
my other question is after improvising and going on a testdrive hitting bumps to see if it would shake it loose it didnt but while i was doing that i hit a bump that caused my 8 and 9 on my RPM gauge to flicker

i thought my 8 and 9 on my gauge was never suppose to light up all this time having this car... so is there a bulb that needs to be replaced in my dash or something??
heres a pic of the lights not on the 8 and 9 on the RPM

so it working for now and holding it in place... but the thing is i dont know if its going to cost me buying a whole new headlight to get that little part inside fixed.... or can i just replace that little part inside of the HID assembly???
my other question is after improvising and going on a testdrive hitting bumps to see if it would shake it loose it didnt but while i was doing that i hit a bump that caused my 8 and 9 on my RPM gauge to flicker


i thought my 8 and 9 on my gauge was never suppose to light up all this time having this car... so is there a bulb that needs to be replaced in my dash or something??
heres a pic of the lights not on the 8 and 9 on the RPM
Ok after bad luck since yesterday trying to install 2 HID lights i broke something inside my headlight that the clip holds the bulb down with or whatever... broke kinda easily now i had to improvise on how to keep the bulb steady.. so i gave up on putting them in and put the factory ones back in.. 
so it working for now and holding it in place... but the thing is i dont know if its going to cost me buying a whole new headlight to get that little part inside fixed.... or can i just replace that little part inside of the HID assembly???
my other question is after improvising and going on a testdrive hitting bumps to see if it would shake it loose it didnt but while i was doing that i hit a bump that caused my 8 and 9 on my RPM gauge to flicker

i thought my 8 and 9 on my gauge was never suppose to light up all this time having this car... so is there a bulb that needs to be replaced in my dash or something??
heres a pic of the lights not on the 8 and 9 on the RPM

so it working for now and holding it in place... but the thing is i dont know if its going to cost me buying a whole new headlight to get that little part inside fixed.... or can i just replace that little part inside of the HID assembly???
my other question is after improvising and going on a testdrive hitting bumps to see if it would shake it loose it didnt but while i was doing that i hit a bump that caused my 8 and 9 on my RPM gauge to flicker


i thought my 8 and 9 on my gauge was never suppose to light up all this time having this car... so is there a bulb that needs to be replaced in my dash or something??
heres a pic of the lights not on the 8 and 9 on the RPM
AS far as your tach goes, those number should be illuminated too. You've got an led bulb out most likely.
https://g35driver.com/forums/g35-sed...-flashing.html
thanks for the help my man! man after reading those replies about my dash light and how expensive its looking i might just have to live with it..
and where im at in the states there arent many salvage places to get parts!
and where im at in the states there arent many salvage places to get parts!
Trending Topics
I thought those were a 'coded' part, so I'm pretty sure you'll need the dealer or a certified shop make any changes to the mileage numbers (programming) so you can use it in your car.
Ok after bad luck since yesterday trying to install 2 HID lights i broke something inside my headlight that the clip holds the bulb down with or whatever... broke kinda easily now i had to improvise on how to keep the led light steady.. so i gave up on putting them in and put the factory ones back in.. 
so it working for now and holding it in place... but the thing is i dont know if its going to cost me buying a whole new headlight to get that little part inside fixed.... or can i just replace that little part inside of the HID assembly???
my other question is after improvising and going on a testdrive hitting bumps to see if it would shake it loose it didnt but while i was doing that i hit a bump that caused my 8 and 9 on my RPM gauge to flicker

i thought my 8 and 9 on my gauge was never suppose to light up all this time having this car... so is there a bulb that needs to be replaced in my dash or something??
heres a pic of the lights not on the 8 and 9 on the RPM

so it working for now and holding it in place... but the thing is i dont know if its going to cost me buying a whole new headlight to get that little part inside fixed.... or can i just replace that little part inside of the HID assembly???
my other question is after improvising and going on a testdrive hitting bumps to see if it would shake it loose it didnt but while i was doing that i hit a bump that caused my 8 and 9 on my RPM gauge to flicker


i thought my 8 and 9 on my gauge was never suppose to light up all this time having this car... so is there a bulb that needs to be replaced in my dash or something??
heres a pic of the lights not on the 8 and 9 on the RPM
Last edited by HerbertWagner; Jun 19, 2013 at 06:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post




