Hello , got a problem with the G...
The other day the sel light came on so checked it out and it is an O2 sensor code. Got under the car to check it out and found the plug from the factory harness attaching to the downstream O2 sensor was ripped off. The car is lowered so it does scrape once in a while. I bought a new bosch sensor but not sure how to plug it in so now I have a couple questions:

1) does anyone have a plug/harness they can sell? I know the sensors interchange with other cars so as long as it plugs in we are god to go.

2) can someone help me find out what wire color are the 2 grounds the signal and the heater? mines are white, black, pink and green.

Thanks in advance

 

 

This is on the harness side looking at the back of the broken connector and this is how the wires will need to be arranged. Once you get it all hooked back up make sure all of your fuses are good. Sorry for the delayed response brother.

 

Thanks bro this really helps alot..... now to fix it and off to the smog shop.

 

I have the same issue right now, did you manage to fix it?

 

Did you ever figure out where to get a new sensor or how to make it connect? I have the same problem I just need it to work for emissions,

 

You can cut the harness off of a donor vehicle at a salvage/wrecking yard and solder splice it onto your vehicle. Then it's just an easy color-for-color splice.

Alternately they do make replacement aftermarket harnesses.