Dual Megan racing catback
#92
Did some changes to the exhaust today. Minor ones. Major changes come next week on Saturday or so I am told. Had 2 hangers that broke. I eliminated one and made 1 custom. I came up with the design and Kenny welded it and cut it and I spray painted the hanger to keep it from rusting. I also used an aluminum flange/gasket between the hanger and subframe to keep the subframe steel out of contact with the mild steel hanger bracket.
I also removed the stock heat shied on the driver side because it was hanging out too much and it was visible if the car was on an incline. I also painted the subframe above the mufflers with some high temp thermal coating.
I also removed the stock heat shied on the driver side because it was hanging out too much and it was visible if the car was on an incline. I also painted the subframe above the mufflers with some high temp thermal coating.
Last edited by Andrei; 07-11-2010 at 01:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM
VatoVazq
Steering & Suspension
15
12-23-2015 10:01 AM