Had to bump, because i still think this is a dope a** set up

Did some changes to the exhaust today. Minor ones. Major changes come next week on Saturday or so I am told. Had 2 hangers that broke. I eliminated one and made 1 custom. I came up with the design and Kenny welded it and cut it and I spray painted the hanger to keep it from rusting. I also used an aluminum flange/gasket between the hanger and subframe to keep the subframe steel out of contact with the mild steel hanger bracket.

I also removed the stock heat shied on the driver side because it was hanging out too much and it was visible if the car was on an incline. I also painted the subframe above the mufflers with some high temp thermal coating.