Advice on Plenum spacers
Registered User
Joined: Sep 2009
Posts: 220
Likes: 0
From: Morristown, NJ
Originally Posted by MD website
MREV 2 Manifold:
The Motordyne MREV 2 Manifold is high-torque plenum mod designed for use on any VQ engine.
When used with a 5/16" spacer on the REVUP engine, every test to date shows MREV 2 Manifold will add a "minimum" of 15+ HP and 18+ TQ at 4500 RPM. MREV 2 Manifold is easily the single most effective bolt on modification available for the REVUP VQ engine.
When used with on the non-REVUP engine, the gains are very similar to that of the 5/16" spacer but the MREV 2 Manifold will show a slightly lower peak value, with a slightly higher average value and a slightly higher TQ value. Overall, MREV 2 Manifold provides "area under the curve" and is the highest gain plenum mod available.
The Motordyne MREV 2 Manifold is high-torque plenum mod designed for use on any VQ engine.
When used with a 5/16" spacer on the REVUP engine, every test to date shows MREV 2 Manifold will add a "minimum" of 15+ HP and 18+ TQ at 4500 RPM. MREV 2 Manifold is easily the single most effective bolt on modification available for the REVUP VQ engine.
When used with on the non-REVUP engine, the gains are very similar to that of the 5/16" spacer but the MREV 2 Manifold will show a slightly lower peak value, with a slightly higher average value and a slightly higher TQ value. Overall, MREV 2 Manifold provides "area under the curve" and is the highest gain plenum mod available.
You need to be a premier member to have a custom avatar. You can use one of the stock images though.
Joined: Nov 2009
Posts: 1,407
Likes: 7
From: Indianapolis, Indiana
Excellent. I guess I'll be looking into ordering the MD copper with iso! From the site it's saying $295 :-\ but i'll do some research.
Thanks for everyone's help
Thanks for everyone's help
Registered User
Joined: Sep 2009
Posts: 220
Likes: 0
From: Morristown, NJ
Depends on the brace. I bet my GT Spec brace would go over a 1/2" spacer since its height is adjustable. The main concern is usually running the brace AND the engine cover.
i have a 2006 sport 6M/T and i have the rev-up on my car .... and im looking to get a spacer .... so i need to get the 5/16" Motordyne MREV 2??? correct ??and what kind the copper or coolant control valve .. i live in tampa and its always hot and humid out .....thanks for the help everyone
is this what i need ???
is this what i need ???
Last edited by SN00P; Jan 22, 2010 at 03:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Engine - Intake/Fuel
7
Jan 14, 2016 01:44 AM
thechitoguy
G35 Sedan V35 2003-06
12
Oct 1, 2015 05:25 PM
FreshVQ
The G-Spot
4
Sep 30, 2015 01:41 PM
