Any pointers for the Nismo/Aero bumper install?
#16
04-13-2007 | 05:37 PM
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
Originally Posted by Socal_G_sedan
here is what mental notes I had when i did the install to be made aware of
1. drill out the center of the 2 cluminum pieces thats riveted onto the bumper support, they come right off (mentioned already)
2. You dont need rivet gun, you can just go to local home depot to buy short nut and bolt for 99 cents and they work just fine. (this is for the sidemarker housing thats going to be reused and put onto the nismo bumper)
*****3. Cover both fenders or have someone help you so each can hold one side! This is the most important because those sidemarker housings will scratch up your fenders BAD if not careful!*****
Good luck dave, its gonna look great and dont forget to stare at your car for a minimum of 10 minutes after install
1. drill out the center of the 2 cluminum pieces thats riveted onto the bumper support, they come right off (mentioned already)
2. You dont need rivet gun, you can just go to local home depot to buy short nut and bolt for 99 cents and they work just fine. (this is for the sidemarker housing thats going to be reused and put onto the nismo bumper)
*****3. Cover both fenders or have someone help you so each can hold one side! This is the most important because those sidemarker housings will scratch up your fenders BAD if not careful!*****
Good luck dave, its gonna look great and dont forget to stare at your car for a minimum of 10 minutes after install
#18
04-14-2007 | 01:58 PM
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
#19
04-14-2007 | 09:58 PM
#20
04-15-2007 | 12:36 AM
#21
04-15-2007 | 01:15 AM
Registered User
iTrader: (8)
Joined: Oct 2004
Posts: 6,647
Likes: 12
From: South East Texas
Q50 Red Sport 400 RWD
Originally Posted by DaveB
The bumper arrived with no damage which is shocking since UPS was the shipper. Tony repackages all the bumpers prior to shippment because the Nissan box is flimsy. His extra precaution makes for peace of mind on both sides. I will take before and after pics. Since I have black, the change won't be as visually striking especially when photographed (black is hard to photograph). I'm excited though because I've wanted this bumper since I got my car 2.5 years ago and the OEM bumper is an eye sore.
I beg to differ, it WILL be a striking difference!(even in pics)
Good luck and post pics.
remember when you park...stop short! to prevent scuffs
Keep a bottle of quick mist for pesky bugs or whatever.
Last edited by Texan1; 04-15-2007 at 01:17 AM.
#23
04-15-2007 | 03:43 AM
#24
04-15-2007 | 12:27 PM
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
Originally Posted by Socal_G_sedan
wow dave...now can you tell me that doesn't look so different......looks GRRRRRRRRREAT!!!!!!! sexy as hell...flows so much smoother with that painted front grill........wow.....i love it so much even though i got my own lol
#26
04-15-2007 | 01:15 PM
Registered User
iTrader: (8)
Joined: Oct 2004
Posts: 6,647
Likes: 12
From: South East Texas
Q50 Red Sport 400 RWD
Looks hot. I would consider getting the nismo sills and rear. The sills have a hot flare to them that umm, while it's suttle, it is hot. The rear looks aggressive with the lower under-spoiler too.
If you decide to paint sills and rear, I still think your G will look hot...so much better than b4.
If you decide to paint sills and rear, I still think your G will look hot...so much better than b4.
#27
04-16-2007 | 01:02 AM
Thread
Thread Starter
Forum
Replies
Last Post
Nick_M
Interior & Exterior
1
08-03-2015 11:08 PM
st33zygill
Exterior - Body Parts
3
07-29-2015 10:05 PM
