When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good sticky but needs a couple things added, the Torx you need is a TR30, not a T25 as listed.
TR is the tamper resistant one he described but it makes it easier to search for the correct tool name. Also it's a 30 not a 25.
Torque the TR30 screws to 82 INCH/lbs when reinstalling.
I strongly recommend taking a picture of the CENTERING MARK on the clock switch before you disassemble it, install the new switch so the centering mark is EXACTLY the same or you will have flashing lights on the dash and require a trip to Nissan to have them recalibrate the steering angle sensor.
Using a metric steering wheel puller is a better option then banging on the steering wheel for 15 minutes until it pops off. The torque for the large center nut in the steering wheel is 25 FOOT/lbs