I was wondering for the people that have purchased the Demon Eyes from AACstyle.com which temperature they got. They offer 4300K, 6000K, 8000K, and 10000K. I want to get ones that would be closest to a white color. Would they be the 4300K or the 6000K? Thanks and if you have any pics of the different color temps that would help out too.

 

I would not go over 6000K. Anything more than that I think it will appear more blueish than white.

 

6000K.

 

Wow the 6000K really looks great. I orginially ordered the 4300K but changed my order to the 6000K CCFL. I am planning on installing the rings as well as the clearance strip, hope the install isn't too difficult because I have never done anything like this before.

 

i know its your car and stuff man but u dont drive a honda or a BMW for that matter. keep it classy

 

4300k...matches my ccfl corners

 

any updates on pics of various temps?

 

Not the best in the world but kinda shows the differance:

 

Thanks G...

I was just trying to see if anyone new had them installed.. I saw that image on the ebay site.. much appreciated though..

 

how hard is it to install those halos??

 

supposedly very easy.. Just remove the headlights, bake them in the oven for 15 mins at 215F to open them, place the cathodes and wire them through the back of the housing, attach to the converter power, then attach that to a 12V power supply (city lights work fine) then place the light back together put back in the oven to reseal and replace the lights..

Finito..

Here's a DIY Video as well.. I plan on installing these..


They have different ones for the 04 and 06 headlights, so make sure you get the right ones..

http://www.automotivelightstore.com/...i-halokit.aspx

 

4300K gets my vote, stay true to the pure white. just looks alot cleaner and more professional.

 

I just got and installed these recently and was trying to see what color(temp) would be comparable as far as a match..

http://store.ijdmtoy.com/Audi-Style-...trip_sku57.htm

Here they are installed..

Shot tonight w/ a Point and Shoot thus the off white balance, was a strong flourescent light overhead. (city light only turned on)




Shot the night of Installation w/ a 20D DSLR (projector (OEM (4300) + city light)






I just purchased a D2S 6000K HID bulb for the projector and plan to get the demon eyes as well.. Since they're DRLs still wondering if I should match the LEDs which seem to be closer to 8000k or the 6000 for the HID.. I have a TB G, so I can pull of the blueish hue.. But my headlight casings are also painted TB so I might get some blueish tone w/ that if I go 6000.

I'm torn still..