We pulled the clip down with the pick.

 

cheers!

 

I cant figure out how to unclip the harness fromthe headlight, there doesnt seem to be anywhere to "unclip", any help?

 

use a small mirror, you can see a small clip there, i used a small 3mm flat head to get it apart, it took me 2 hours to figure it out and take it off, lol
be sure you get everything right before you connect it back! =]

 

can someone plz tell me how to remove the far in bolt in Step2??

thanks.

 

be ready for cuts man, i used a screw driver -phillips for that because my socket wrench didnt have enough room

 

you need to use a long screwdriver or a long socket extension to reach it

 

damn...
i tried man.... i give up... just gonna take it to some local shop for them to do it...

tahnks thou.

 

aw man, gotta go to the shop for 1 bolt =[

 

i was looking at your posts and i gotta say, its so strange to see your car and garage with an oven in the backgroung but i love it!

 

I am also wondering about this.. Where exactly is everyone getting the part to replace the orange blinkers??

I see that i can get the clear strips from the website in this post by nowhere does anyone say where to get the replacement part for the orange blinkers. Anyone???????????????????

 

great write up. helped me out

 

The clear lenses you see in most of the pictures come with the AAC halo kits. You can make your own from the plastic light covers from fluorescent light fixtures.

 

QUOTE]

do you have to take the hole bumper off to out these leds in you car?

 

^^ no, just let it hang from the bottom, and take the headlight off, theres 2 caps on back, pretty straight foward from there