Check out this link for more info on how to swap out your headlight bulbs:
https://g35driver.com/forums/lighting/134414-diy-s-replacing-low-beam-clearance-strip-bulbs.html

 

nice

 

^^for some reason I cant view that link in your post

 

I have the same question! After getting the casing open with baking (or a hair dryer as i've done in the past), where can we buy a clear circular marker for the signal? Also, how are the parking lamp stripes so bright and led looking in these pics?

I've been scouring the forums day and night for an answer to these questions so pleasee help, i wanna get it done soon....thanks.

 

After getting the casing open with baking, where can we buy the circular clear marker to replace the signal?

Also, how are the parking lamp stripes so bright and led looking in these pics?

I've been scouring the forums day and night for an answer to these questions so please help, i wanna get it done soon....thanks.

 

The strips are from here:
http://automotivelightstore.com/inde...ROD&ProdID=105

The clear lenses are from the same place but no link, sorry.

 

For the clear lenses, you can buy fluorescent lighting diffusers from Home Depot and just cut it to fit.

As for the strips, they are CCFL and require much more work than simply replacing a bulb.

 

I couldnt find it on the site, how do you order it then?

 

Links should be working now...

 

Great write-up!

 

yes it is.

 

Here's mine











================================================== ====================

BTW: It that a stove in the there??

 

what exact bulb are you using for your corners? They looks nice and white.

 

I'm nearly finished with the demon eye install for the AAC kit. The instructions say to "thread the wires (from inside the housing) behind the reflectors and out the 'parking light' hole in the clearance strip." Being that there is a bulb and socket in the clearance strip, does anyone know how we are to put the wires through?

In other words, how did you guys run the wires from inside the sealed headlamp housing to the outside where the converters are? Thanks a bunch.

 

Its not a bulb, its actually a CCFL strip.

http://www.automotivelightstore.com/...ROD&ProdID=105

Also, there is now a video as well for the installation of the halos that can be seen here:

http://www.automotivelightstore.com/...n=Custom&ID=31