06-07 Custom Black Quad Projector Headlights
#1
06-07 Custom Black Quad Projector Headlights
I am selling my 2006 projector fully custom headlights. These lights took me a year to finish. The finish product was basically what i wanted, with only a few snags in the process. Below are details of the build and lights.
I first purchased 2006 OEM projectors from Riverside Infiniti. Below are the other stuff i did:
FX-R Projectors with clear lenses
http://www.theretrofitsource.com/pro...roducts_id=101
Gatling Gun Shrouds
http://www.theretrofitsource.com/pro...products_id=72
Clear Lenses for the turn signals
http://www.theretrofitsource.com/pro...roducts_id=150
LED Strips from superbrightleds.com
2 Pairs of Halo Rings (different sizes)
7443 relays (for 03 conversion)
Color matched Gloss black
I used the Gatling gun shroud, and molded it into the foglight slot of the headlights. Originally i wanted the outside ring to be lit up with the Halo Rings. Unfortunately, the fog light slot is not large enough for that specific spot i wanted, so improvised. The LEDs were put on the main projecter for the Iron Man Effect. Below is a picture of how the accent lights look, when connected and turned on.
Now, when i finally installed the headlights (with Danny), i didnt connect the Halos or LEDs, mainly because i didnt have Halo converters. So what me and danny did was turn the bottom projector as the MAIN headlight, and the above one as a fog. I never ended up connecting the top one (laziness) and drove around with the bottom lights as mains. Below is a picture of the cutoffs. They have an interesting form, almost criss-cross. Since these are supposed to be fogs anyways, i never paid any attention to them.
After a certain amount of time, i noticed that the passanger side light was not sealed perfectly shut. You can tell by looking at the glass and seeing it touch the lights a bit. After a while, dust and debris accumulated at the bottom of the light. See pictures below.
At first, i thought that this happened because of the seeling... But after i installed my Strafe V2 headlights, i also began to realize it was happening again. I found out it WASNT a leak in the headlight, but rather, my splash guard had a hole in it, and the water was splashing into them from behind.
The paint shouldnt be damaged, and the dirt should be easily remvoable and cleanable. The headlights will need your bulbs, ballasts, and converters for the CCFL Halo Rings (they are like 10 bucks the pair.) The bottom projectors share the same bulb size (D2S) as the OEM ones. Another thing that i recommend doing is finding a way to cover the back part of the lower projector.
Finally, the important part. Price. Im asking 750 OBO. I will not do trades. OEM headlights alone cost $515++, and of course there is the custom work i did. You wont find any other headlights with what i did. If you have any questions, feel free to PM me, message here, or email/IM me.
To clear up, the first 3 pictures are different because i had taken other ones previously to sell in my regional Classifieds, but its been so long that the date isnt valid. So i took new ones.
Contact me with any questions.
I first purchased 2006 OEM projectors from Riverside Infiniti. Below are the other stuff i did:
FX-R Projectors with clear lenses
http://www.theretrofitsource.com/pro...roducts_id=101
Gatling Gun Shrouds
http://www.theretrofitsource.com/pro...products_id=72
Clear Lenses for the turn signals
http://www.theretrofitsource.com/pro...roducts_id=150
LED Strips from superbrightleds.com
2 Pairs of Halo Rings (different sizes)
7443 relays (for 03 conversion)
Color matched Gloss black
I used the Gatling gun shroud, and molded it into the foglight slot of the headlights. Originally i wanted the outside ring to be lit up with the Halo Rings. Unfortunately, the fog light slot is not large enough for that specific spot i wanted, so improvised. The LEDs were put on the main projecter for the Iron Man Effect. Below is a picture of how the accent lights look, when connected and turned on.
Now, when i finally installed the headlights (with Danny), i didnt connect the Halos or LEDs, mainly because i didnt have Halo converters. So what me and danny did was turn the bottom projector as the MAIN headlight, and the above one as a fog. I never ended up connecting the top one (laziness) and drove around with the bottom lights as mains. Below is a picture of the cutoffs. They have an interesting form, almost criss-cross. Since these are supposed to be fogs anyways, i never paid any attention to them.
After a certain amount of time, i noticed that the passanger side light was not sealed perfectly shut. You can tell by looking at the glass and seeing it touch the lights a bit. After a while, dust and debris accumulated at the bottom of the light. See pictures below.
At first, i thought that this happened because of the seeling... But after i installed my Strafe V2 headlights, i also began to realize it was happening again. I found out it WASNT a leak in the headlight, but rather, my splash guard had a hole in it, and the water was splashing into them from behind.
The paint shouldnt be damaged, and the dirt should be easily remvoable and cleanable. The headlights will need your bulbs, ballasts, and converters for the CCFL Halo Rings (they are like 10 bucks the pair.) The bottom projectors share the same bulb size (D2S) as the OEM ones. Another thing that i recommend doing is finding a way to cover the back part of the lower projector.
Finally, the important part. Price. Im asking 750 OBO. I will not do trades. OEM headlights alone cost $515++, and of course there is the custom work i did. You wont find any other headlights with what i did. If you have any questions, feel free to PM me, message here, or email/IM me.
To clear up, the first 3 pictures are different because i had taken other ones previously to sell in my regional Classifieds, but its been so long that the date isnt valid. So i took new ones.
Contact me with any questions.
#4
#6
#7
Trending Topics
#10
Yea i saw your thread, but the pics are very low quality and very small. I couldnt check them out. You got progress thread with better pics?