Progress Thread: DarksideG35
#407
#409
k so i just got done test fitting the fronts again and theyre hitting the lower right corner of the caliper, just enough to basically leave a light mark on the caliper itself when you rotate the wheel. i added the other 10mm spacer just to see if it would clear with a total of 20mm and i could almost stick a screw driver thru the gap so i know 20mm will work so hopefully the 15mm will be just enough. the caliper is basically hitting the very back of the spoke where the bolts are. theres a small lip right there on the inside of the wheel and it drops off right after the spokes are bolted on so a couple more mm and the caliper should be sitting in that open space behind the spokes with just enough clearance. heres a pic to show the issue circled in red as well as an extra one just to show off how sexy the brakes look behind the meisters
Last edited by darksideG35; 09-06-2012 at 07:28 PM.
#411
The following users liked this post:
darksideG35 (09-06-2012)
#412
#414
#418