20x8.5 +40 with 10mm spacer
#36
03-23-2008 | 08:38 PM
ENVautoDetailing.com
iTrader: (47)
Joined: Sep 2005
Posts: 9,257
Likes: 136
From: San Diego/Redondo Beach
Originally Posted by FlyingLumpia
My buddy who rolled my fenders say that how it starts, push them out, then get a 225 on there and next thing I know VIP
-GP-
#37
03-24-2008 | 05:02 PM
#39
03-28-2008 | 06:11 PM
Originally Posted by FlyingLumpia
I got some spacers for the rear. I tried them on and took some pics. I then took out for a drive. It rubbed, but its weird it seem like the passenger side only rubbed. Well here are the pics. I am getting my fenders rolled this weekend. Hope that will help out. What do you guys think.
Here is without.
Here is with.
]
Here is without.
Here is with.
]
#40
03-29-2008 | 04:34 AM
Joined: Jul 2006
Posts: 3,284
Likes: 38
From: Washington State
Ok just got done putting 10mm up front. So right now I am 20x8.5 +30 all around. I even put the 10mm spacer on top of the 5mm and I think with .5 neg more chamber I think it would fit without rubbing. So it looks like I might be looking for some 15mm spacer 
Here are some pics, I will try to take better tomorrow if I am not snowed in.
Here is with the 5mm
Here is the 10mm on top of the 5mm
And how it sits now, just with the 10mm
Like I said, I will try to go out and take some better pic tomorrow or during the meet on Sunday.
Here are some pics, I will try to take better tomorrow if I am not snowed in. Here is with the 5mm
Here is the 10mm on top of the 5mm
And how it sits now, just with the 10mm
Like I said, I will try to go out and take some better pic tomorrow or during the meet on Sunday.
#43
03-30-2008 | 11:22 PM
Thread
Thread Starter
Forum
Replies
Last Post
FreshVQ
The G-Spot
4
09-30-2015 01:41 PM
