WORK Teaser
Depending on the offset, they should fit. Anything higher than a 30, they not gonna work, no pun intended. 35 offset on 8.5" wheel with 245/40 is not even a finger tip clearance on my car.
I'll be honest. It's gonna be damn close. I mounted just the wheels up front today and it was a few mm away from the suspension arm. Even with a 5-10mm spacer it could work, but not sure how much it will poke on the outside edge. It may be too aggressive for the amount of driving I do.
It may be safer just to with a 18x8.5 +32 on the 245/40 in the front? At least then it should fit a little more proper.
I will be mounting 2 wheel/tire tomorrow morning and do another test fit to see if it's possible. If not, will bite the bullet and downgrade, at least I will have learned something then.
It may be safer just to with a 18x8.5 +32 on the 245/40 in the front? At least then it should fit a little more proper.
I will be mounting 2 wheel/tire tomorrow morning and do another test fit to see if it's possible. If not, will bite the bullet and downgrade, at least I will have learned something then.
damnnn sorry to hear that man. I'd say give it a shot and see how it turns out. But if you want to gurantee fitment and not worry.. i'd say go with the 8.5. OR if they have it, maybe a 9.0 if they got it if you want to stay in the 9" category
Originally Posted by bowzer
I'll be honest. It's gonna be damn close. I mounted just the wheels up front today and it was a few mm away from the suspension arm. Even with a 5-10mm spacer it could work, but not sure how much it will poke on the outside edge. It may be too aggressive for the amount of driving I do.
It may be safer just to with a 18x8.5 +32 on the 245/40 in the front? At least then it should fit a little more proper.
I will be mounting 2 wheel/tire tomorrow morning and do another test fit to see if it's possible. If not, will bite the bullet and downgrade, at least I will have learned something then.
It may be safer just to with a 18x8.5 +32 on the 245/40 in the front? At least then it should fit a little more proper.
I will be mounting 2 wheel/tire tomorrow morning and do another test fit to see if it's possible. If not, will bite the bullet and downgrade, at least I will have learned something then.
I'm dropped on 350z h&r springs. I do have some 20mm spacers around that I will try with the test fit of wheel/tire tomorrow. Here is a pic with them and the 20mm spacer. As you can see it sticks out a good bit, but I will find out for sure tomorrow. The only way to have these fit is to prolly really stretch the tire, i'm not willing to go that far.




